SMART AUTO LIFTS

• All columns operate together, individually or can be divided into separate pairs.
• All columns act as control columns to raise or lower vehicles.
• 67” lifting stroke for tall mechanics.
• Adjustable lifting forks accommodate the widest range of wheels from 13” to 24” for up to 48” diameter tires (wider carriages optional for larger tires). No wheel reducer sleeves needed.
• Optional Auto Frame adaptor available for passenger cars & light trucks.
• Sealed rollers on the wheels for easy movement of the columns.
• Hydraulic operation (no screw drives) for efficient, fast & easy lifting.
• Barrel type roller bearings on carriages for a lifetime of trouble free service (no plastic slide blocks or plastic rollers).
• Sealed roller bearings on carriages for a lifetime of trouble free service (no plastic slide blocks or plastic rollers).
  

  Check out the Anatomy of a Mobile Column Lift

• 208-240 volt 3 phase standard, also optional 440/460 volt or single phase, or 24 volt DC operation.
• Communication and electrical cables disconnect at both ends.
• Manual safety over-ride permits columns to be lowered in a power outage without using hand cranks.
• 18,000, 24,000 or 30,000 lb. capacity columns.
• Mix 15” & 22” fork models to safely raise all vehicles & fully contact tire surface.
• Low profile fork angle for easy positioning of columns, especially for floatation tires.
• Mix different capacity columns for heavy axle vehicles.

SAFE VEHICLE HOISTS

• 19 safety lock positions spaced every 3” starting at 12”.
• Locking pins prevent movement of adjustable forks.
• Pallet jack style DUAL STEERING WHEELS lower when weight is applied (vs.spring loaded steering wheels which can cause columns to roll when not loaded.)
• Low mounting of power units means low center of gravity which makes moving the columns easier vs. topple prone “top heavy” columns.
• 15” lifting forks handle wide tires or 22” long forks for raising BOTH dual rear tires (22” forks reduce capacity to by 2,000 lbs.)

STRONG TRUCK LIFTS

Front to rear bumper adaptor slips over the forks to allow vehicles to be raised front to rear by the bumpers.

• 18,000, 24,000 or 30,000 lb.capacity columns mean Mohawk lifts vehicles other brands won’t.
• Column construction made of 5 3/4” or 7” USA made, [ shaped fork lift channel sections. Mohawk does not use I-beam, H-beam, bent sheet metal or rectangular tubing for structural integrity.
• Carriages ride on roller bearings for smooth steady lifting. No plastic slide blocks or plastic rollers.
• Larger capacities & wider carriages available.

24 VOLT DC OPERATED LIFT

24 VOLT DC OPERATION FOR COMPLETE PORTABILITY! Mohawk’s 24 volt D.C. (battery operated) mobile lift features the same heavy duty column, retractable wheels, adjustable lifting forks, and available options of Mohawk’s 220/440 volt mobile lift.

• Mohawk’s simple to operate and simple to understand control consoles are the same on all posts.
• Any post will raise, lower, or park (lock) the lift.
• Each post is equipped with an emergency stop button to turn the lift off. Each column equipped with a switch to operate all columns, pairs or a single column.
• Lift notifies operator when batteries need to be charged, communications are halted, stops haven’t been released and many other user functions.
• Easily programmed, password protected, auto height limiter for low ceiling shops.

View More Images of This Lift on the Mohawk Lifts PR Site

24 VOLT DC OPERATED LIFT

TP-26 Specs

• 
  What Makes a Mohawk a Mohawk Brochure (PDF)
• 
  How a Mohawk Mobile Column
  Lift is Made (PDF)
• 
  Questions to Ask Before You Buy a Mobile Column Lift