tr_1

TR Series: TR-33, TR-35, TR-50 & TR-75

Four Post Automotive Runway Lifts

The Mohawk TR-33 thru TR-75 model 4 post automotive lifts are all capable of raising all types of public works vehicles including; winged snow plow trucks, loaders, buses & all regular type passenger vehicles. Mohawk lifts feature the most under-vehicle access available for all types of repairs & p.m.’s. and are available with rolling “wheels-free” jacks to raise the tires off the tracks for tire & axle service.

Because Quality Lifts Last a Lifetime

mohawk above ground design
  • 4 Post Automotive LiftThe Mohawk four post design is the fastest lift made anywhere for fleets. Better than in-ground, mobile or parallelogram lifts, just drive on and go to work as no wheelbase adjustment is ever needed.
  • Four post design provides more under vehicle access without side obstructions like scissors or parallelogram lifts.
  • Surface mounted design and operation avoids the environmental issues associated with in-ground lifts.
  • Clear floor design allows tool boxes, shop equipment and high rise tire dollies full access under and to the side of the vehicle for repairs. (see picture 12)
  • 24” or 32″ wide runways provide maximum undercarriage access with 4 feet between the runways.
features
  • Full 6’-2 1/2” lifting height for the tallest mechanics.
  • Adjustable runways to accommodate any vehicle wheelbase.
  • Optional equipment such as rolling jacks, track lighting, air lines, oil drain pans and 110 volt outlets makes the best lift even better! (see options section)
versatile & adaptable
  • Mohawk TR four post truck and car lifts for fleets, utility vehicles, RV’s, school and transit bus operations, dump trucks and vans. Big and Small, Mohawk lifts them all!
superior safety systems
  • Single point lock release.
  • Multi-position mechanical safety locks in all posts. (see picture 3)
  • Fully redundant hydraulic safety back-ups consisting of pressure compensated flow control and velocity fuse valving.
  • Direct drive lifting cylinders at each post means no cables to stretch. (see picture 7)
  • Mechanical side to side chain synchronization serves as redundant back-up to hydraulic fluid displacement equalization system.
  • Automatic track leveler designed for heavy ended trucks to keep runways perfectly level.
  • Front and rear wheel stops built into runway with automatic flip-up chocks at the rear end.
  • Mohawk carriages smoothly ride on double sealed, self-lubricating ball bearing rollers. No plastic slide blocks! (see picture 11)
compare design features & construction
  • Four Post Truck Lift EquipmentHeavy duty track construction made with three parallel 12” wide flange I – beams. (see picture 2)
  • Direct drive cylinders on 4 post truck lifts mean no maintenance with no “top rail” to get in the way. (see picture 7)
  • Available in 20’, 25’ and 30’ long runways (custom lengths available upon request.) (see picture 13)
  • Mohawk offers a full 3 year warranty.
  • The heaviest construction of any competitive lift. Just compare.

AUTOMOTIVE LIFT FEATURES

AUTOMOTIVE LIFT OPTIONS & ACCESSORIES

Please visit the Mohawk Lifts architects section for a complete list of specifications

LEARN MORE ABOUT RUNWAY LIFT OPTIONS & ACCESSORIES

Learn more about our other lift options & accessories:
TD1000AH & TD2000 High Rise Tire Dolly
ST-2000N 2000lb Capacity Lifting Jack

VIEW THIS INFORMATION AS A PDF

Four Post Automotive Runway Lifts

The Mohawk TR-33 thru TR-75 model 4 post automotive lifts are all capable of raising all types of public works vehicles including; winged snow plow trucks, loaders, buses & all regular type passenger vehicles. Mohawk lifts feature the most under-vehicle access available for all types of repairs & p.m.’s. and are available with rolling “wheels-free” jacks to raise the tires off the tracks for tire & axle service.

Automotive Lift Design

4 Post Automotive Lift

  • The Mohawk four post design is the fastest lift made anywhere for fleets. Better than in-ground, mobile or parallelogram lifts, just drive on and go to work as no wheelbase adjustment is ever needed.
  • Four post design provides more under vehicle access without side obstructions like scissors or parallelogram lifts.
  • Surface mounted design and operation avoids the environmental issues associated with in-ground lifts.
  • Clear floor design allows tool boxes, shop equipment and high rise tire dollies full access under and to the side of the vehicle for repairs.
  • 24” or 32″ wide runways provide maximum undercarriage access with 4 feet between the runways.

Mohawk Safety Systems

  • Single point lock release.
  • Multi-position mechanical safety locks in all posts.
  • Fully redundant hydraulic safety back-ups consisting of pressure compensated flow control and velocity fuse valving.
  • Direct drive lifting cylinders at each post means no cables to stretch.
  • Mechanical side to side chain synchronization serves as redundant back-up to hydraulic fluid displacement equalization system.
  • Automatic track leveler designed for heavy ended trucks to keep runways perfectly level.
  • Front and rear wheel stops built into runway with automatic flip-up chocks at the rear end.
  • Mohawk carriages smoothly ride on double sealed, self-lubricating ball bearing rollers. No plastic slide blocks!

Lift Operation

  • Mohawk TR four post truck and car lifts for fleets, utility vehicles, RV’s, school and transit bus operations, dump trucks and vans. Big and Small, Mohawk lifts them all!
  • Heavy duty track construction made with three parallel 12” wide flange I – beams.
  • Direct drive cylinders on 4 post truck lifts mean no maintenance with no “top rail” to get in the way.
  • Available in 20’, 25’ and 30’ long runways (custom lengths available upon request.)
  • Mohawk offers a full 3 year warranty.
  • The heaviest construction of any competitive lift. Just compare.

Four Post Truck Lift Equipment

Features & Images

1. Under-Vehicle Access

Picture 1 of 13

Full under-vehicle access with no obstructions (Note: tires raised off of runways.)

Options & Accessories

Model TD1000 & TD2000 TIre Dolly

Picture 1 of 9

  • 1,000 and 2,000 lb. capacities
  • Use with any lift or anytime heavyduty truck tires must be removed
  • High 46" lifting height & 6" side shifting ability makes alignment simple
  • Heavy Duty 4" steel ball bearing casters allow easy movement
  • Rear casters swivel 360 degrees, front casters equipped with locks
  • Air/hydraulic (AH) models easily raise and lower dual tires
  • Tilting lift arms aid axle realignment and provide additional stability to the fully loaded tire dolly
  • Safety chain provided to secure loads
  • Hand crank model with high gear ratio winch allows for one-handed operation
  • Counterbalanced tire dolly available for parallelogram lifts

Rough Specifications

tr33-specs