TP-26/TP-30: 2 Post Truck Lifts

26,000 & 30,000 LB LIFTS

Mohawk’s TP 26 was the first two post frame contact lift made to suit the needs of heavy duty fleets. These heavy duty two post lifts are hydraulically equalized, using a pair of height adjustable overhead hydraulic lines for all types of trucks and utility vehicles (optional underground lines available).

ALI ETL Certified Lift

Overview

HEAVY DUTY LIFTS FOR HEAVY DUTY SERVICE

MOHAWK AUTO LIFT DESIGN
Two Post Vehicle Lift Heavy Duty Column Construction
7”wide by 1” thick High strength fork lift channel construction
  • Lifts vehicles up to 30,000 lbs.
  • Surface mounted design bolts to the shop floor.
  • Twin post design allows complete under vehicle access for all repairs yet leaves the wheels hanging free for tire and brake service.
  • Takes up less shop space than ramp lifts.
  • ALI safety certified to meet national and local OSHA & ANSI codes (ANSI/ALI ALCTV-2006) for the safety of your shop’s employees.
  • No in-ground oil tanks, no digging for installations, making instal – lations fast and service easy.
  • Medium thru Heavy Duty vehicles, Mohawk’s TP-26 or TP-30 lifts them all.
  • Hammertone paint finish for lasting durability.
AUTO LIFT FEATURES
Mohawk lifts DO NOT use height restrictive overhead cable covers that limit lifting height.
  • Constructed of heavy 7” x 1” fork lift mast channels (NOT formed sheet metal) for a lifetime of trouble free service.
  • Each carriage rides on double sealed, self lubricating ball bearing rollers (NOT plastic slide blocks) for a lifetime of maintenance free service.
  • Direct drive lifting rods attached to each cylinder and carriage meaning (no cables, chains, or pulleys); no parts to wear or maintain.
  • WIDE 48” base for stability.
AUTO LIFT BENEFITS
  • Arm length designed to accommodate all of your specific fleet wheel base requirements.
  • 5”, 7 1/2” and 10” stacking truck adaptors included to reach truck frames and get around fuel tanks or tool boxes.
  • Built to last forever.
CAR LIFT SAFETIES

  • Hand-held pendant control to raise or lower the lift by releasing both mechanical locks & allowing hydraulic fluid to return to the reservoir.
  • Release the mechanical locks with Mohawk’s air cylinders. Upon release, safeties immediately re-engage.
  • 26,000 or 30,000 lb. capacity to safely raise loaded work and utility trucks.
  • 12 position 11/2” steel plate safety locks in each post start engaging at 5” and continue every 6” through the full lifting height of 6’7”.
  • Patented Hydraulic locking system, backed by velocity fuses and Pressure Compensated Flow Control valving

  • Overview
  • Features & Images
  • Options & Accessories
  • Specifications
  • Support

LEARN ABOUT 2 POST LIFT OPTIONS & ACCESSORIES
FIND OUT MORE ABOUT DETAILED COMPETITIVE FEATURES