TP-20: Two Post Vehicle Lifts

20,000 LB. HEAVY DUTY LIFT

Mohawk’s TP-20 lift uses double telescoping three stage swing arms and slider combination, has a clear floor design and adjustable height overhead hydraulic lines for ultimate flexibility (optional underground lines available).

ALI ETL Certified Lift

Overview

THE 2 post lift for all of the vehicles in your shop. Solid, SAFE & CERTIFIED

MOHAWK DESIGN & FEATURES
Two Post Vehicle Lift Heavy Duty Column Construction
7”wide by 1” thick High strength fork lift channel construction
  • Lifts vehicles up to 20,000 lbs.
  • Surface mounted design bolts to the shop floor.
  • No in-ground oil tanks, no digging for installations, making installations fast and service easy.
  • Low profile, 3 stage arms for access under compact cars through medium duty trucks.
  • ALI safety certified to meet national and local OSHA & ANSI codes (ANSI/ALI ALCTV-2006) for the safety of your shop’s employees.
  • Light thru medium duty vehicles, Mohawk’s TP-20 lifts them all.
  • Constructed of heavy U.S. made 7” x 1” fork lift mast channels (NOT formed sheet metal)
  • Carriages ride on double sealed, self lubricating ball bearing rollers (NOT plastic slide blocks) for a lifetime of maintenance free service.
  • Direct drive lifting rods attached to each cylinder and carriage (no cables, chains, or pulleys) means no parts to wear or maintain
  • WIDE 48” base for stability.
BENEFITS

  • 3 section swing arms make positioning easier than a 2 stage arm and increases lifting range, for all wheelbases.
  • 5”, 7 1/2” and 10” stacking truck adaptors included to reach truck frames and get around fuel tanks or tool boxes.
  • Built Mohawk TOUGH—the TP-20 is the virtually the same structural column and same carriage used in Mohawk’s TP-26 and TP-30!
  • Built to last forever.
SAFETIES
  • Single position mechanical lock release, located at the main post, unlocks both safeties.
  • Release the mechanical locks with Mohawk’s air cylinders. Upon release, safeties immediately re-engage.
  • 20,000 lb. capacity to safely raise fully loaded work and utility trucks.
  • 14 locking positions with locks engaging at 5”
  • Locks made from 1 1/2” thick steel plate
  • Optional safety gauge verifies lift has been lowered onto locks.

Options & Accessories

  • Overview
  • Features & Images
  • Options & Accessories
  • Specifications
  • Support
  • THE 2 post lift for all of the vehicles in your shop. Solid, SAFE & CERTIFIED

    MOHAWK DESIGN & FEATURES
    Two Post Vehicle Lift Heavy Duty Column Construction
    7”wide by 1” thick High strength fork lift channel construction
    • Lifts vehicles up to 20,000 lbs.
    • Surface mounted design bolts to the shop floor.
    • No in-ground oil tanks, no digging for installations, making installations fast and service easy.
    • Low profile, 3 stage arms for access under compact cars through medium duty trucks.
    • ALI safety certified to meet national and local OSHA & ANSI codes (ANSI/ALI ALCTV-2006) for the safety of your shop’s employees.
    • Light thru medium duty vehicles, Mohawk’s TP-20 lifts them all.
    • Constructed of heavy U.S. made 7” x 1” fork lift mast channels (NOT formed sheet metal)
    • Carriages ride on double sealed, self lubricating ball bearing rollers (NOT plastic slide blocks) for a lifetime of maintenance free service.
    • Direct drive lifting rods attached to each cylinder and carriage (no cables, chains, or pulleys) means no parts to wear or maintain
    • WIDE 48” base for stability.
    BENEFITS

    • 3 section swing arms make positioning easier than a 2 stage arm and increases lifting range, for all wheelbases.
    • 5”, 7 1/2” and 10” stacking truck adaptors included to reach truck frames and get around fuel tanks or tool boxes.
    • Built Mohawk TOUGH—the TP-20 is the virtually the same structural column and same carriage used in Mohawk’s TP-26 and TP-30!
    • Built to last forever.
    SAFETIES
    • Single position mechanical lock release, located at the main post, unlocks both safeties.
    • Release the mechanical locks with Mohawk’s air cylinders. Upon release, safeties immediately re-engage.
    • 20,000 lb. capacity to safely raise fully loaded work and utility trucks.
    • 14 locking positions with locks engaging at 5”
    • Locks made from 1 1/2” thick steel plate
    • Optional safety gauge verifies lift has been lowered onto locks.

LEARN ABOUT 2 POST LIFT OPTIONS & ACCESSORIES
FIND OUT MORE ABOUT DETAILED COMPETITIVE FEATURES