| Model # |
Description |
Manufacturer's List Price Dated 9/15/2011 |
Contract Delivered Pricing Dated 9/15/2011 |
|
Scissor Racks |
|
|
| |
RX10 Racks |
|
|
| RX10FT-IS |
Scissor Lift, flush mount version, FIA, Inflation Station, PowerSlide, 10,000lb capacity, Hi-Speed power unit, 161" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$32,720.00 |
$25,460.73 |
| RX10FT-PS |
Scissor Lift, flush mount version, FIA, PowerSlide, 10,000lb capacity, 161" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$30,570.00 |
$23,787.73 |
| RX10JFT |
Scissor Lift, flush mount version, 10,000lb capacity, 161" 2WA WB, (2) 6,000lbs Swing Jacks, stainless turnplates. |
$27,790.00 |
$21,624.50 |
| RX10JT |
Scissor Lift, 10,000lb capacity, 166" 2WA WB, (2) 6,000lbs Swing Jacks, stainless turnplates. |
$27,790.00 |
$21,624.50 |
| RX10T-IS |
Scissor Lift, FIA, Inflation Station, PowerSlide, 10,000lb capacity, Hi-Speed power unit, 166" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$32,720.00 |
$25,460.73 |
| RX10T-PS |
Scissor Lift, FIA, PowerSlide, 10,000lb capacity, 166" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$30,570.00 |
$23,787.73 |
| 20-2583-1 |
RX10 PS Upgrade - Upgrades standard rack to PowerSlide only including FIA connectivity. PowerSlide turnplates not included. |
$1,320.00 |
$1,027.14 |
| 20-2584-1 |
RX10 IS Only Upgrade - Upgrades a PowerSlide rack to Inflation Station. (FIA connectivity was already present and is retained) |
$1,800.00 |
$1,400.65 |
| 20-2585-1 |
RX10 PS and IS Upgrade - Upgrades a standard rack to PowerSlide and Inflation Station including FIA connectivity. PowerSlide turnplates not included. |
$3,120.00 |
$2,427.80 |
|
RX10L Racks |
|
|
| RX10LFT-IS |
Scissor Lift, flush mount version, FIA, Inflation Station, PowerSlide, 10,000lb capacity, Hi-Speed power unit, 175" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$33,220.00 |
$25,849.80 |
| RX10LFT-PS |
Scissor Lift, flush mount version, FIA, PowerSlide, 10,000lb capacity, 175" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$31,070.00 |
$24,176.80 |
| RX10LJFT |
Scissor Lift, flush mount version, 10,000lb capacity, 175" 2WA WB, (2) 6,000lbs Swing Jacks, stainless turnplates. |
$28,290.00 |
$22,013.57 |
| RX10LJT |
Scissor Lift, 10,000lb capacity, 179" 2WA WB, (2) 6,000lbs Swing Jacks, stainless turnplates. |
$28,290.00 |
$22,013.57 |
| RX10LT-IS |
Scissor Lift, FIA, Inflation Station, PowerSlide, 10,000lb capacity, Hi-Speed power unit, 179" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$33,220.00 |
$25,849.80 |
| RX10LT-PS |
Scissor Lift, FIA, PowerSlide, 10,000lb capacity, 179" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$31,070.00 |
$24,176.80 |
| 20-2584-1 |
RX10 IS Only Upgrade - Upgrades a PowerSlide rack to Inflation Station. (FIA connectivity was already present and is retained) |
$1,800.00 |
$1,400.65 |
| 20-2583-1 |
RX10 PS Upgrade - Upgrades standard rack to PowerSlide only including FIA connectivity. PowerSlide turnplates not included. |
$1,320.00 |
$1,027.14 |
| 20-2585-1 |
RX10 PS and IS Upgrade - Upgrades a standard rack to PowerSlide and Inflation Station including FIA connectivity. PowerSlide turnplates not included. |
$3,120.00 |
$2,427.80 |
|
RX12L Racks |
|
|
| RX12LFT-PS |
Scissor Lift, flush mount version, FIA, PowerSlide, 12,000lb capacity, 161" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$34,458.00 |
$26,813.13 |
| RX12LJFT |
Scissor Lift, flush mount version, 12,000lb capacity, 161" 2WA WB, (2) 6,000lbs Swing Jacks, Stainless turnplates. |
$31,378.00 |
$24,416.46 |
| RX12LJFT-IS |
Scissor Lift, flush mount version, FIA, Inflation Station, PowerSlide, 12,000lb capacity, Hi-Speed power unit, 161" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$36,608.00 |
$28,486.13 |
| RX12LJT |
Scissor Lift, 12,000lb capacity, 161" 2WA WB, (2) 6,000lbs Swing Jacks, Stainless turnplates. |
$31,378.00 |
$24,416.46 |
| RX12LT-IS |
Scissor Lift, FIA, Inflation Station, PowerSlide, 12,000lb capacity, Hi-Speed power unit, 161" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$36,608.00 |
$28,486.13 |
| RX12LT-PS |
Scissor Lift, FIA, PowerSlide, 12,000lb capacity, 161" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$34,458.00 |
$26,813.13 |
|
RX12XL Racks |
|
|
| RX12XLFT-IS |
Scissor Lift, flush mount version, FIA, Inflation Station, PowerSlide, 12,000lb capacity, Hi-Speed power unit, 173" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$37,520.00 |
$29,195.80 |
| RX12XLFT-PS |
Scissor Lift, flush mount version, FIA, PowerSlide, 12,000lb capacity, 173" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$35,370.00 |
$27,522.80 |
| RX12XLJFT |
Scissor Lift, flush mount version, 12,000lb capacity, 173" 2WA WB, (2) 6,000lbs Swing Jacks, Stainless turnplates. |
$32,290.00 |
$25,126.13 |
| RX12XLJT |
Scissor Lift, 12,000lb capacity, 173" 2WA WB, (2) 6,000lbs Swing Jacks, Stainless turnplates. |
$32,290.00 |
$25,126.13 |
| RX12XLT-IS |
Scissor Lift, FIA, Inflation Station, PowerSlide, 12,000lb capacity, Hi-Speed power unit, 173" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$37,520.00 |
$29,195.80 |
| RX12XLT-PS |
Scissor Lift, FIA, PowerSlide, 12,000lb capacity, 173" 2WA WB, (2) 6,000lbs Swing Jacks, PowerSlide turnplates. |
$35,370.00 |
$27,522.80 |
| |
Scissor Racks - Options and Accessories |
|
|
| 133-67-1 |
Swing Air Jack, 4,500 lb. Capacity. For scissor racks. |
$2,900.00 |
$2,256.60 |
| 133-69-1 |
Swing Air Jack, 6,000 lb. Capacity, for RX-12 only |
$3,100.00 |
$2,412.23 |
| 147-104-1-001 |
RX Approach Ramp Extension (Two Required) Adds 12.75~ to overall length of RX9 and RX10. (Standard w/ RX12) |
$375.00 |
$291.80 |
| 147-104-1-PPP |
RX Approach Ramp Extension (Two Required) Adds 12.75~ to overall length of RX9 and RX10. (Standard w/ RX12) Black or blue color. Specify PPP=005 for black or PPP=007 for blue. |
$375.00 |
$291.80 |
| 147-113-1 |
Long RX Approach Ramp Extension (Two Required) Adds 17.75~ to overall length of RX9 and RX10, or 5~ to RX12 when substituted for 147-104-1-001. (Two Required) |
$530.00 |
$412.41 |
| 147-113-1-PPP |
Long RX Approach Ramp Extension (Two Required) Adds 17.75~ to overall length of RX9 and RX10, or 5~ to RX12 when substituted for 147-104-1-001. (Two Required). Black or blue color. Specify PPP=005 for black or PPP=007 for blue. |
$530.00 |
$412.41 |
| 20-1403-1 |
Jack Riser Kit. Adds 4" to lifting capability of jack. Two risers included. |
$217.00 |
$168.86 |
| 20-1680-1 |
Drive Thru kit for RX-9 and RX-9-L - Adds 3' 7" to overall length of rack. |
$1,550.00 |
$1,206.12 |
| 20-1741-1 |
Drive Thru kit for RX-12-L and RX-12-XL Adds 4' 9" to overall length of rack. |
$2,300.00 |
$1,789.72 |
| 20-2013-1 |
Alignment Rack Lighting Kit - (4 light kit) Lighting turns on and off automatically as rack is raised or lowered. (For open power unit consoles produced before 11-4-07) |
$1,500.00 |
$1,167.21 |
| 20-2074-1 |
PowerSlide Bridges (2) - Does not function without 20-2075-1. Only used to upgrade 20-2075-1 to 20-2076-1 |
$450.00 |
$350.16 |
| 20-2075-1 |
Powerslide Turnplates (2) without automatic bridges. For use with conventional sensors. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$2,030.00 |
$1,579.62 |
| 20-2076-1 |
Powerslide Turnplates (2) with automatic bridges. For use with camera sensor systems. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$2,520.00 |
$1,960.91 |
| 20-2102-1 |
RX Flush Conversion Kit - For non-Powerslide Racks. All vintage RX9 and RX12 - use current pit layout. |
$1,550.00 |
$1,206.12 |
| 20-2103-1 |
RX Flush Conversion Kit - For Powerslide Racks. All vintage RX9 and RX12 - use current pit layout. |
$1,550.00 |
$1,206.12 |
| 20-2114-1 |
50mm stainless turnplate kit (standard friction). Includes (2) Stainless 50 mm delrin ball turnplates, 50mm turnplate bridge, and bolt-on guide strips. Less out standard turnplate and bridge (if applicable) when ordered with aligner. |
$925.00 |
$719.78 |
| 20-2169-1 |
Stage 2 RX Approach Ramps - 40" long extended approach ramps for all RX models. |
$2,000.00 |
$1,556.28 |
| 20-2173-1 |
Alignment Rack Lighting Kit - (4 light kit) Lighting turns on and off automatically as rack is raised or lowered. (For scissor lifts with closed power unit consoles produced after 11-4-07) |
$1,500.00 |
$1,167.21 |
| 20-2189-1 |
Stage 2 RX Approach Ramps - 50" long extended approach ramps for all RX models. |
$2,500.00 |
$1,945.35 |
| 20-2336-1 |
Powerslide Turnplates, Low-Friction, Stainless Steel with bridge. For use with camera sensor systems. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$3,000.00 |
$2,334.42 |
| 20-2395-1 |
Kit-50mm Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$575.00 |
$447.43 |
| 20-2396-1 |
Kit-1.5~ Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$410.00 |
$319.04 |
| 20-2497-1 |
RX10 Conventional Sensor Extension Kit - For surface-mount applications. Required when using conventional sensors with toe arms. Provides more room for toe arms during use. |
$802.00 |
$757.80 |
| 20-2498-1 |
RX10 Drive-Thru Kit - For surface-mount, drive-thru applications using camera sensors. |
$1,700.00 |
$1,322.84 |
| 20-2501-1 |
RX10 Extended Drive- Thru Kit - For surface-mount, drive-thru applications using conventional sensors with toe arms. |
$2,502.00 |
$2,427.80 |
| 20-2583-1 |
RX10 PS Upgrade - Upgrades standard rack to PowerSlide only including FIA connectivity. PowerSlide turnplates not included. |
$1,320.00 |
$1,027.14 |
| 20-2584-1 |
RX10 IS Only Upgrade - Upgrades a PowerSlide rack to Inflation Station. (FIA connectivity was already present and is retained) |
$1,800.00 |
$1,400.65 |
| 20-2585-1 |
RX10 PS and IS Upgrade - Upgrades a standard rack to PowerSlide and Inflation Station including FIA connectivity. PowerSlide turnplates not included. |
$3,120.00 |
$2,427.80 |
| 22-442-2 |
Rubber Wheel Chock |
$26.70 |
$25.23 |
| 51-1696-1 |
Clip-on moveable workstep |
$137.00 |
$129.45 |
| 64-50-2 |
Swing Air Jack Pad |
$12.30 |
$11.63 |
| |
Diagnostic Racks |
|
|
| 209-59-L |
D2-L Twin Post Rack, 8,000 lb. Capacity, (2) 4,500 lb. Capacity Swing Air Jacks, Extended Runways. Includes 20-996-1 air kit. |
$16,350.00 |
$12,722.58 |
| |
Diagnostic Racks - Options and Accessories |
|
|
| 118-500-1 |
Bolster Beam for single post in ground or twin post above ground hoists (Template Required) |
$1,495.00 |
$1,163.32 |
| 118-558-1 |
L202 Short Beam - 93" Long |
$1,495.00 |
$1,163.32 |
| 118-582-1-001 |
L202 Offset Beam - 100" Long. for use with L201 and L202 model lifts only. |
$1,495.00 |
$1,163.32 |
| 118-623-1-001 |
L202 Offset Beam - 103.5" Long. Standard beam on L202. |
$1,495.00 |
$1,163.32 |
| 118-624-1-001 |
L202 Symmetric Beam - 100" Long. Use to retrofit existing L202 for use with DSP400 sensors. |
$1,495.00 |
$1,163.32 |
| 13-54-1-001 |
30" Alignment Legs (4 required) Note: 30" Alignment legs are a no-cost option when ordered at the same time as the rack. |
$48.00 |
$45.35 |
| 13-55-1-001 |
36" Alignment Legs. (4 required) Note: 36" alignment legs are a no cost option when ordered at the same time as the rack.DO NOT order with D1-M or L202 standard runway models |
$53.80 |
$50.83 |
| 147-88-1 |
Long Approach Ramp, 36" long, (Two required). |
$295.00 |
$278.74 |
| 20-1403-1 |
Jack Riser Kit. Adds 4" to lifting capability of jack. Two risers included. |
$217.00 |
$168.86 |
| 20-2396-1 |
Kit-1.5~ Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$410.00 |
$319.04 |
| 20-996-1 |
Air Line Kit, center mount coil hoses. |
$238.00 |
$185.20 |
| 22-442-2 |
Rubber Wheel Chock |
$26.70 |
$25.23 |
| 64-50-2 |
Swing Air Jack Pad |
$12.30 |
$11.63 |
 |
Four Post Racks |
|
|
| L441JT |
4-Post, Open Front, 18,000lbs Capacity, 177" 2WA WB, (2) 9,000lbs Swing Jacks, Stainless turnplates, air line kit. |
$28,340.00 |
$22,052.48 |
| L441T-IS |
4-Post, Open Front, 18,000lbs Capacity, FIA, Inflation Station, PowerSlide, 177" 2WA WB, (2) 9,000lbs Swing Jacks, PowerSide turnplates, air line kit. |
$33,820.00 |
$26,316.68 |
| L441T-PS |
4-Post, Open Front, PowerSlide, 18,000lbs Capacity, 177" 2WA WB, (2) 9,000lbs Swing Jacks, PowerSide turnplates, air line kit. |
$30,920.00 |
$24,060.08 |
| L444JT |
4-Post, Closed Front, 18,000lbs Capacity, 211~ 2WA WB, (2) 9,000lbs Swing Jacks, Stainless turnplates, air line kit. |
$28,490.00 |
$22,169.20 |
| L444T-IS |
4-Post, Closed Front, FIA, Inflation Station, PowerSlide, 18,000lbs Capacity, 211~ 2WA WB, (2) 9,000lbs Swing Jacks, PowerSlide turnplates, air line kit. |
$33,970.00 |
$26,433.40 |
| L444T-PS |
4-Post, Closed Front, PowerSlide, 18,000lbs Capacity, 211~ 2WA WB, (2) 9,000lbs Swing Jacks, PowerSlide turnplates, air line kit. |
$31,070.00 |
$24,176.80 |
| |
Four Post Racks - Options and Accessories |
|
|
| 133-62-1 |
8,000 lb. Swing Air Jack. For 4-post racks and parallelogram racks. |
$3,300.00 |
$2,567.86 |
| 133-83-1 |
9,000 lbs Swing Air Jack - Three cylinder for L44X models only. |
$3,300.00 |
$2,567.86 |
| 20-1184-1 |
L421 and L424 Front Mount Power Unit Bracket. |
$150.00 |
$141.73 |
| 20-1365-1 |
Drive-On Ramp Extension Kit for four post racks. For super-low vehicle or extreme floor slope. |
$750.00 |
$583.60 |
| 20-1403-1 |
Jack Riser Kit. Adds 4" to lifting capability of jack. Two risers included. |
$217.00 |
$168.86 |
| 20-1579-1 |
Center Lift Jack Adaptor for Swing Air jacks, includes clip-on storage tray. |
$378.00 |
$294.14 |
| 20-1587-1 |
L421 Runway Extension Kit. With Filler Plate. For use on L421 rack only. |
$2,500.00 |
$1,945.35 |
| 20-1638-1 |
Tool Tray with expandable slot for organizing and storage. |
$245.00 |
$190.64 |
| 20-1974-1 |
L421 / L424 Ramp Extension adds 6 1/2" to wheelbase capacity and overall length. Can be used on all L421 and L424 racks. (Two extenders included) |
$420.00 |
$326.82 |
| 20-2033-1 |
Extra Long Drive-On Ramp Extension Kit for low ground clearance, high floor slope installations. Adds 40" to overall length of rack. May be folded up. For four post racks. |
$1,800.00 |
$1,400.65 |
| 20-2035-1 |
Oil Drain Pan (30 gallon) complete with fittings and a 12 foot drain hose. |
$1,750.00 |
$1,361.74 |
| 20-2075-1 |
Powerslide Turnplates (2) without automatic bridges. For use with conventional sensors. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$2,030.00 |
$1,579.62 |
| 20-2076-1 |
Powerslide Turnplates (2) with automatic bridges. For use with camera sensor systems. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$2,520.00 |
$1,960.91 |
| 20-2114-1 |
50mm stainless turnplate kit (standard friction). Includes (2) Stainless 50 mm delrin ball turnplates, 50mm turnplate bridge, and bolt-on guide strips. Less out standard turnplate and bridge (if applicable) when ordered with aligner. |
$925.00 |
$719.78 |
| 20-2340-1 |
Inflation Station/FIA Console - Add-on console to add FIA and inflation station to L44X model lifts. Already included in -IS versions. Order separately only if adding FIA/IS capability later. |
$3,450.00 |
$2,684.58 |
| 20-2377-1 |
Alignlights - Rack lighting kit for L441 and L444 model 4-Post lifts. Do NOT shut off at ground like RX Models. |
$1,500.00 |
$1,167.21 |
| 20-2391-1 |
Front Mount Power Unit Bracket for L441 and L444 models |
$200.00 |
$155.63 |
| 20-2395-1 |
Kit-50mm Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$575.00 |
$447.43 |
| 20-2396-1 |
Kit-1.5~ Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$410.00 |
$319.04 |
| 20-2586-1 |
L44X PS Upgrade - Upgrades a standard rack to PowerSlide only. FIA connectivity NOT included. PowerSlide turnplates not included. |
$1,100.00 |
$855.95 |
| 20-2587-1 |
L44X IS Only Upgrade - Upgrades a PowerSlide rack to Inflation Station AND FIA connectivity. |
$3,190.00 |
$2,482.27 |
| 20-2588-1 |
L44X IS and PS Upgrade - Upgrades a standard rack to PowerSlide and Infation Station including FIA connectivity. PowerSlide turnplates not included. |
$4,290.00 |
$3,338.22 |
| 22-442-2 |
Rubber Wheel Chock |
$26.70 |
$25.23 |
| 51-1696-1 |
Clip-on moveable workstep |
$137.00 |
$129.45 |
| 64-50-2 |
Swing Air Jack Pad |
$12.30 |
$11.63 |
 |
Parallelogram Racks |
|
|
| RMHDJT |
Parallel Lift Rack, 16,000lbs Capacity, Open front and rear, 177" 2WA WB, (2) 8,000lbs Swing Jacks, Stainless Turnplates. |
$39,540.00 |
$30,767.64 |
| |
Parallelogram Racks - Options and Accessories |
|
|
| 133-62-1 |
8,000 lb. Swing Air Jack. For 4-post racks and parallelogram racks. |
$3,300.00 |
$2,567.86 |
| 20-1403-1 |
Jack Riser Kit. Adds 4" to lifting capability of jack. Two risers included. |
$217.00 |
$168.86 |
| 20-1604-1 |
Long RM approach ramps, 8" longer than standard ramps for low ground clearance vehicles. |
$810.00 |
$630.29 |
| 20-1638-1 |
Tool Tray with expandable slot for organizing and storage. |
$245.00 |
$190.64 |
| 20-2395-1 |
Kit-50mm Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$575.00 |
$447.43 |
| 20-2396-1 |
Kit-1.5~ Filler Plate - Fits into turnplate pockets when turnplates are not used. |
$410.00 |
$319.04 |
| 22-442-2 |
Rubber Wheel Chock |
$26.70 |
$25.23 |
| 51-1696-1 |
Clip-on moveable workstep |
$137.00 |
$129.45 |
| 64-50-2 |
Swing Air Jack Pad |
$12.30 |
$11.63 |
 |
Pit Racks |
|
|
| P441-IS |
Pit Rack 18,000lbs Capacity - Inflation Station/FIA console with PowerSlide, 177~ 2-wheel align WB, (2) 9,000# jacks, 50mm turnplate pockets, air line kit.Concrete work not included. |
$21,593.00 |
$16,802.37 |
| P441J |
Pit Rack 18,000lbs Capacity - 177~ 2-wheel align WB, (2) 9,000# jacks, 50 mm turnplate pockets, air line kit. Concrete work not included. |
$17,693.00 |
$13,767.62 |
| P444-IS |
Pit Rack 18,000lbs Capacity - Inflation Station/FIA console with PowerSlide, 211~ 2-wheel align WB, (2) 9,000# jacks, 50mm turnplate pockets, air line kit. Concrete work not included. |
$22,093.00 |
$17,191.44 |
| P444J |
Pit Rack 18,000lbs Capacity - 211~ 2-wheel align WB, (2) 9,000# jacks, 50mm turnplate pockets, air line kit. Concrete work not included. |
$18,193.00 |
$14,156.69 |
| |
Pit Racks - Options and Accessories |
|
|
| 20-1403-1 |
Jack Riser Kit. Adds 4" to lifting capability of jack. Two risers included. |
$217.00 |
$168.86 |
| 20-794-1 |
Air Kit for PN Rack |
$238.00 |
$185.20 |
| 22-442-2 |
Rubber Wheel Chock |
$26.70 |
$25.23 |
| |
Frame Lifts |
|
|
| JA |
Wheel Stands (12-14") 2 front, 2 rear stands |
$1,600.00 |
$1,245.02 |
| JB |
Wheel Stands (24~) 2 front, 2 rear stands. 1,500 lbs. max. capacity each. 6,000 lbs. max. total vehicle capacity. Requires a frame contact lift (not included). |
$2,300.00 |
$1,789.72 |
| |
Most Popular Options and Accessories |
|
|
| 133-62-1 |
8,000 lb. Swing Air Jack. For 4-post racks and parallelogram racks. |
$3,300.00 |
$2,567.86 |
| 133-67-1 |
Swing Air Jack, 4,500 lb. Capacity. For scissor racks. |
$2,900.00 |
$2,256.60 |
| 133-69-1 |
Swing Air Jack, 6,000 lb. Capacity, for RX-12 only |
$3,100.00 |
$2,412.23 |
| 133-83-1 |
9,000 lbs Swing Air Jack - Three cylinder for L44X models only. |
$3,300.00 |
$2,567.86 |
| 147-104-1-001 |
RX Approach Ramp Extension (Two Required) Adds 12.75~ to overall length of RX9 and RX10. (Standard w/ RX12) |
$375.00 |
$291.80 |
| 147-104-1-PPP |
RX Approach Ramp Extension (Two Required) Adds 12.75~ to overall length of RX9 and RX10. (Standard w/ RX12) Black or blue color. Specify PPP=005 for black or PPP=007 for blue. |
$375.00 |
$291.80 |
| 147-113-1 |
Long RX Approach Ramp Extension (Two Required) Adds 17.75~ to overall length of RX9 and RX10, or 5~ to RX12 when substituted for 147-104-1-001. (Two Required) |
$530.00 |
$412.41 |
| 147-113-1-PPP |
Long RX Approach Ramp Extension (Two Required) Adds 17.75~ to overall length of RX9 and RX10, or 5~ to RX12 when substituted for 147-104-1-001. (Two Required). Black or blue color. Specify PPP=005 for black or PPP=007 for blue. |
$530.00 |
$412.41 |
| 20-1365-1 |
Drive-On Ramp Extension Kit for four post racks. For super-low vehicle or extreme floor slope. |
$750.00 |
$583.60 |
| 20-2076-1 |
Powerslide Turnplates (2) with automatic bridges. For use with camera sensor systems. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$2,520.00 |
$1,960.91 |
| 20-2173-1 |
Alignment Rack Lighting Kit - (4 light kit) Lighting turns on and off automatically as rack is raised or lowered. (For scissor lifts with closed power unit consoles produced after 11-4-07) |
$1,500.00 |
$1,167.21 |
| 20-2336-1 |
Powerslide Turnplates, Low-Friction, Stainless Steel with bridge. For use with camera sensor systems. Must less out turnplate kit 20-2531-1 if ordered with standard aligner or less out 20-2532-1 if ordered with premium aligner. |
$3,000.00 |
$2,334.42 |
| 20-2340-1 |
Inflation Station/FIA Console - Add-on console to add FIA and inflation station to L44X model lifts. Already included in -IS versions. Order separately only if adding FIA/IS capability later. |
$3,450.00 |
$2,684.58 |
| 20-2377-1 |
Alignlights - Rack lighting kit for L441 and L444 model 4-Post lifts. Do NOT shut off at ground like RX Models. |
$1,500.00 |
$1,167.21 |