| Model # | Description | Manufacturer's List Price Dated 9/15/2009 |
Contract Delivered Pricing Dated 9/15/2009 |
 |
WA100 Consoles |
||
| WA122 | Aligner with column/wall mounted cabinet and 19" LCD Flat Panel Display. Note: Column mounting of wall mount cabinets is not supported on HS401ML sensors. | $12,614.00 | $10,230.07 |
| WA131 | Aligner with compact cabinet and 17" LCD Flat Panel Display. | $11,714.00 | $9,500.16 |
| WA132 | Aligner with compact cabinet and 19" LCD Flat Panel Display. | $12,614.00 | $10,230.07 |
| WA141 | Aligner with large cabinet and 17" LCD Flat Panel Display. | $12,614.00 | $10,230.07 |
| WA142 | Aligner with large cabinet and 19" LCD Flat Panel Display. | $13,514.00 | $10,959.98 |
WA100 Console Upgrades |
|||
| 20-2176-1 | 811 to WA100 Upgrade Kit - Upgrades an 811 console configuration with USB box to the latest WA100 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a USB box, color printer and minimum 17" UVGA monitor be present. | $2,995.00 | $2,775.97 |
| 20-1751-P-1 | P211/P411 to WA100 Upgrade Kit - Upgrades any P211 or P411 console configuration to the latest WA100 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a color printer and minimum 17" UVGA monitor be present. | $4,495.00 | $4,166.27 |
| 20-1751-CP-1 | P211/P411 to WA100 Upgrade Kit with color printer - Upgrades any P211 or P411 configuration to the latest WA100 hardware and color printer. (No exchanges and no deletions). Note that this upgrade requires that a minimum 17" UVGA monitor be present. | $5,243.00 | $4,859.57 |
| 20-1751-C19LP-1 | P211/P411 to WA100 Upgrade Kit with color printer and 19" LCD Flat Panel Display - Complete kit, upgrades any P211 or P411 configuration to the latest WA100 hardware, printer, and 19" LCD Flat Panel Display (No exchanges and no deletions). | $6,443.00 | $5,971.81 |
| 20-2324-1 | Pronto-II/PA113/PA131 to WA100 upgrade kit. Upgrades Pronto-II or PA100 system with existing mobile cabinet to a WA100. If Pronto or HS400 sensors are present kit 20-2316-1 is required. THIS IS AN EXCHANGE PRICE KIT SOLD ONLY THROUGH THE HUNTER T/T REP. | $5,400.00 | $5,630.72 |
| 20-1751-CR-1 | R611 to 811 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest 811 hardware and color printer. (No exchanges and no deletions.) This upgrade kit requires that a minimum 17" UVGA monitor be present. | $5,243.00 | $4,859.57 |
| 20-1751-R-1 | R611 to WA100 Upgrade Kit - Upgrades any R611 console configuration to the latest WA100 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a color printer and minimum 17" UVGA monitor be present. | $4,495.00 | $4,166.27 |
| 20-1751-C19LR-1 | R611 to WA100 Upgrade Kit with color printer and 19" LCD Flat Panel Display - Complete kit, upgrades any R611 configuration to the latest WA100 hardware, printer, and 19" LCD Flat Panel Display (No exchanges and no deletions). | $6,443.00 | $5,971.81 |
| 20-1776-1 | S311 to S811 Upgrade Kit without Monitor - Kit exchanges 811 computer for 311 computer. (Requires an "S" model cabinet and UVGA monitor already be present, not included). Exchange price is listed. May NOT be used with 511 consoles. | $5,400.00 | $4,379.45 |
| 20-1778-1 | S311 to WA130 Upgrade Kit with 17" LCD - Kit exchanges WA100 computer for 311 computer. (Requires an "S" model cabinet, not included). Exchange price is listed. May NOT be used with 511 consoles. | $5,900.00 | $4,784.95 |
| 20-1778-P-1 | S311 to WA130 Upgrade Kit with 17" LCD and Color Printer - Kit exchanges WA100 computer for 311 computer. (Requires an "S" model cabinet, not included). Exchange price is listed. May NOT be used with 511 consoles. | $6,648.00 | $5,391.59 |
| 20-1751-S-1 | S411/S611 to 811 Upgrade Kit - Upgrades any S411 or S611 console configuration to the latest 811 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires a color printer and minimum 17" UVGA monitor be present. | $4,495.00 | $4,166.27 |
| 20-1751-CS-1 | S411/S611 to 811 Upgrade Kit with color printer - Upgrades any S411 or S611 configuration to the latest 811 hardware and color printer. (No exchanges and no deletions.) This upgrade kit requires that a minimum 17" UVGA monitor be present. | $5,243.00 | $4,859.57 |
| 20-1751-C19LS-1 | S411/S611 to WA100 Upgrade Kit with color printer and 19" LCD Flat Panel Display - Complete kit, upgrades any S411 or S611 configuration to the latest WA100 hardware, printer, and 19" LCD Flat Panel Display. (No exchanges and no deletions). | $6,443.00 | $5,971.81 |
| 20-1772-1 | S511 to WA130 Upgrade Kit - Kit exchanges WA100 computer for 511 computer. (Requires an "S" model cabinet and UVGA monitor already be present, not included). Exchange price is listed. May NOT be used with 311 consoles. | $5,400.00 | $4,379.45 |
| 20-1772-P-1 | S511 to WA130 Upgrade Kit with Color Printer - Kit exchanges WA100 computer for 511 computer. (Requires an "S" model cabinet and UVGA monitor already be present, not included). Exchange price is listed. May NOT be used with 311 consoles. | $6,148.00 | $4,986.09 |
 |
WA200 Consoles |
||
| WA223 | Aligner with column/wall mount cabinet and 20" Widescreen LCD Flat Panel Display. Note: Column mounting of wall mount cabinets is not supported on HS401ML sensors. | $15,754.00 | $12,776.64 |
| WA224 | Aligner with column/wall mount cabinet and 26" Widescreen LCD Flat Panel Display. Note: Column mounting of wall mount cabinets is not supported on HS401ML sensors. | $16,876.00 | $13,686.59 |
| WA233 | Aligner with premium compact cabinet and 20" Widescreen LCD Flat Panel Display. | $16,139.00 | $13,088.88 |
| WA234 | Aligner with premium compact cabinet and 26" Widescreen LCD Flat Panel Display. | $17,261.00 | $13,998.83 |
| WA243 | Aligner with premium large cabinet and 20" Widescreen LCD Flat Panel Display. | $17,039.00 | $13,818.79 |
| WA244 | Aligner with premium large cabinet and 26" Widescreen LCD Flat Panel Display. | $18,161.00 | $14,728.74 |
| WA245 | Aligner with premium large cabinet and 32" Widescreen LCD Flat Panel Display. | $18,761.00 | $15,215.35 |
WA200 Console Upgrades |
|||
| 20-2177-1 | 811 to WinAlign WA200 Upgrade Kit - Upgrades an 811 console configuration with USB box to the latest WA200 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a USB box, color printer and minimum 17" UVGA monitor | $4,650.00 | $4,309.94 |
| 20-1752-P-1 | P211/P411 to WinAlign WA200 Upgrade Kit - Upgrades any P211 or P411 console configuration to the latest WA200 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a color printer and minimum 17" UVGA monitor be present. | $6,150.00 | $5,700.24 |
| 20-1752-CP-1 | P211/P411 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any P211 or P411 configuration to the latest WA200 hardware, and color printer. (No exchanges and no deletions). Note that this upgrade requires that a minimum 17" UVGA monitor present. | $6,898.00 | $6,393.53 |
| 20-1752-C20LP-1 | P211/P411 to WinAlign WA200 Upgrade Kit with color printer and 20" Widescreen LCD - Complete kit, upgrades any P211 or P411 configuration to the latest WinAlign WA200 hardware, printer and 20" Widescreen LCD (No exchanges and no deletions). | $8,098.00 | $7,505.78 |
| 20-2325-1 | Pronto-II/PA113/PA131 to WA200 upgrade. Upgrades Pronto-II or PA100 with existing mobile cabinet to a WA200. If Pronto or HS400 sensors are present kit 20-2316-1 is required. THIS IS AN EXCHANGE PRICE KIT THAT WILL BE SOLD ONLY THROUGH THE HUNTER T/T REP. | $7,055.00 | $7,356.43 |
| 20-1751-CR-1 | R611 to 811 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest 811 hardware and color printer. (No exchanges and no deletions.) This upgrade kit requires that a minimum 17" UVGA monitor be present. | $5,243.00 | $4,859.57 |
| 20-1752-R-1 | R611 to WinAlign WA200 Upgrade Kit - Upgrades any R611 console configuration to the latest WinAlign WA200 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a color printer and minimum 17" UVGA monitor be present. | $6,150.00 | $5,700.24 |
| 20-1752-CR-1 | R611 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest WA200 hardware, and color printer. (No exchanges and no deletions). Note that this upgrade requires that a minimum 17" UVGA monitor be present. | $6,898.00 | $6,393.53 |
| 20-1752-C20LR-1 | R611 to WinAlign WA200 Upgrade Kit with color printer and 20" Widescreen LCD - Complete kit, upgrades any R611 configuration to the latest WinAlign WA200 hardware, printer and 20" Widescreen LCD (No exchanges and no deletions). | $8,098.00 | $7,505.78 |
| 20-1752-S-1 | S411/S611 to WinAlign WA200 Upgrade Kit - Upgrades any S411 or S611 console configuration to the latest WA200 PC hardware. (No exchanges and no deletions). Note that this upgrade kit requires that a color printer and a minimum 17" UVGA monitor be present. | $6,150.00 | $5,700.24 |
| 20-1752-CS-1 | S411/S611 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any S411 or S611 configuration to the latest WA200 hardware, and color printer. (No exchanges and no deletions). Note that this upgrade requires that a minimum 17" UVGA monitor present. | $6,898.00 | $6,393.53 |
| 20-1752-C20LS-1 | S411/S611 to WinAlign WA200 Upgrade Kit with color printer and 20" Widescreen LCD - Complete kit, upgrades any S411 or S611 configuration to the latest WinAlign WA200 hardware, printer and 20" Widescreen LCD. (No exchanges and no deletions). | $8,098.00 | $7,505.78 |
WA Console Options |
|||
| 20-1755-1 | 2ShopResults.NET - 1 year subscription | $150.00 | $121.65 |
| 20-2333-1 | BMW 20 PIN Cable - For use with CodeLink. Required for model year 2001 and older BMW models with Dynamic Stability Control (DSC). | $130.00 | $105.43 |
| 20-2150-1 | CodeLink with XF2 POD - Data link from WinAlign to vehicle OBDII (J1962) connector. Order if wireless capability needed and no existing XF2 POD. Includes CodeLink device, XF2 wireless POD, J1962 cable. Requires WinAlign 11.0 or greater. | $1,290.00 | $1,046.20 |
| 20-2151-1 | CodeLink without XF2 POD - Data link from WinAlign to vehicle OBDII (J1962) connector. Order if you already have XF2 POD or do not want wireless capability. Includes CodeLink device and J1962 cable. Requires WinAlign 11.0 or greater. | $975.00 | $790.73 |
| 20-1971-1 | Combination Digital - PHOTO/VIDEO on DVD - (For installation on new or existing WA100 consoles with WinAlign) Provides both digital inspection and adjustment photos, and AlignGuide video instruction for inspection, adjustments, and operation | $1,475.00 | $1,196.24 |
| 20-1970-1 | Digital-PHOTO on DVD - (For installation on new or existing WA100 consoles with WinAlign) Provides digital inspection and adjustment photos. Includes "X2" electronic key. (Video clips require Combination kit 20-1971-1) (Standard on all WA200 | $500.00 | $405.50 |
| 20-2211-1 | Memory Upgrade Kit (1 GB) provides 1 GB to WinAlign WA100, WA200 and 811-B Aligners. Contains one 1 GB memory module. | $225.00 | $182.48 |
| 20-1760-1 | Network Module - connects a Hunter WinAlign Series Aligner to a customer's network. | $160.00 | $129.76 |
| 20-1756-1 | ShopResults.NET - 3 year subscription | $300.00 | $243.30 |
| 20-1411-1 | Stainless Steel Turnplate Upgrade (pair) - price listed is a substitution price for standard turnplates. (Must be ordered with the alignment console) (Standard on all WA200 consoles) | $384.00 | $311.43 |
| 20-1757-1 | UnderCarInfo.NET - 1 year subscription | $150.00 | $121.65 |
| 20-1758-1 | UnderCarInfo.NET - 3 year subscription | $300.00 | $243.30 |
| 20-2005-1 | WinAlign Plus Kit - (For installation on new or existing WA100 consoles with WinAlign) Provides PHOTO/VIDEO on DVD and WinAlign Tuner. Includes "X2" electronic key. (Standard on WA200s consoles) | $1,975.00 | $1,601.74 |
| 20-2004-1 | WinAlign Tuner Kit - (For installation on new or existing WA100 consoles with WinAlign) Provides custom alignments for modified vehicles. Includes "X2" electronic key. (Standard on WA200 consoles) | $500.00 | $405.50 |
| 20-2195-1 | Wireless Network Kit - connects a WA100 Aligner to a shop's existing 802.11 a/b/g wireless network. | $180.00 | $145.98 |
WA Console Upgrade Options |
|||
| 20-2333-1 | BMW 20 PIN Cable - For use with CodeLink. Required for model year 2001 and older BMW models with Dynamic Stability Control (DSC). | $130.00 | $105.43 |
| 20-2150-1 | CodeLink with XF2 POD - Data link from WinAlign to vehicle OBDII (J1962) connector. Order if wireless capability needed and no existing XF2 POD. Includes CodeLink device, XF2 wireless POD, J1962 cable. Requires WinAlign 11.0 or greater. | $1,290.00 | $1,046.20 |
| 20-1971-1 | Combination Digital - PHOTO/VIDEO on DVD - (For installation on new or existing WA100 consoles with WinAlign) Provides both digital inspection and adjustment photos, and AlignGuide video instruction for inspection, adjustments, and operation | $1,475.00 | $1,196.24 |
| 20-1970-1 | Digital-PHOTO on DVD - (For installation on new or existing WA100 consoles with WinAlign) Provides digital inspection and adjustment photos. Includes "X2" electronic key. (Video clips require Combination kit 20-1971-1) (Standard on all WA200 | $500.00 | $405.50 |
| 20-2211-1 | Memory Upgrade Kit (1 GB) provides 1 GB to WinAlign WA100, WA200 and 811-B Aligners. Contains one 1 GB memory module. | $225.00 | $182.48 |
| 20-1760-1 | Network Module - connects a Hunter WinAlign Series Aligner to a customer's network. | $160.00 | $129.76 |
| 20-2317-1 | Pronto/PA121 mobile cabinet upgrade kit. Required for housing ProAlign to WinAlign upgrade kits 20-2324-1 or 20-2325-1 when moving from a wall/column mount cabinet. THIS IS AN EXCHANGE PRICE KIT THAT WILL BE SOLD ONLY THROUGH THE HUNTER T/T REP. | $1,950.00 | $2,033.32 |
| 20-1788-1 | Sound Upgrade Kit for "P" Style Cabinets - Required if console being upgraded does not already have sound capability (speaker & wiring), and Digital Video is included with upgrade. | $120.00 | $97.32 |
| 20-1305-1 | Sound Upgrade Kit for "S" Style Cabinets - Required if console being upgraded does not already have sound capability (speaker & wiring), and Digital Video is included with upgrade. | $120.00 | $97.32 |
| 20-2195-1 | Wireless Network Kit - connects a WA100 Aligner to a shop's existing 802.11 a/b/g wireless network. | $180.00 | $145.98 |
 |
PA100 Consoles |
||
| PA121 | Aligner with column/wall mount cabinet, 17" LCD Flat Panel Display, and color printer. | $5,500.00 | $4,460.55 |
| PA131 | Aligner with mobile cabinet, 17" LCD Flat Panel Display, and color printer. | $6,965.00 | $5,648.68 |
PA Console Options |
|||
| 20-2313-1 | 20-2313-1 PA Alternative Mounting base for Pronto and PA121 | $450.00 | $364.95 |
| 25-129-1 | Turnplate - 14" Passenger Car/Lt. One Stainless Steel turnplate 1.5 inches thick (Two required) | $470.00 | $381.17 |
| 25-140-1 | Turnplate - One Passenger Car/Lt. Truck Turnplate 14" (Two required). | $278.00 | $225.46 |
| 38-512-1 | 10 Ft. Extension Cable - To extend sensor or remote indicator cable. | $96.50 | $95.04 |
| 20-1832-1 | 5 Position Battery Charger - Provides a charging station for up to 5 DSP500 Sensors batteries. The charger can be mounted in S or R cabinets built after September 2003 or as a free standing charger using AC Conversion Kit, 20-1864-1. | $675.00 | $547.43 |
| 20-1962-1 | 50 mm Low Friction Stainless Steel Turnplates, 20-1962-1 is for RX DC and PowerSlide groups. Two turnplates included. Requires 50mm Turnplate Bridge 20-1963-1 when used with DSP600 sensors. (Two Included) | $1,220.00 | $989.43 |
| 25-157-1 | 50 mm Stainless Steel Turnplate, 25-157-1 is for PowerSlide groups. Requires 50mm Turnplate Bridge 20-1963-1 when used with DSP600 sensors. (Two Required) | $410.00 | $332.51 |
| 20-1864-1 | AC Conversion Kit - Allows the 5 Position Battery Charger, 20-1832-1, to be used as a free standing charger without using the aligner power supply. | $180.00 | $145.98 |
| 20-1578-1 | Adaptor - Mag Wheel Short Kit - (for 1 self-centering adaptor) Includes 4 Mag Assembly Adaptor (175-63-3) | $136.00 | $110.30 |
| 20-823-1 | Adaptor - Rim Stud Extension Kit - (for 2 self-centering adaptors) Includes 8 Rim Stud Extensions (134-81-1) | $100.00 | $81.10 |
| 20-1898-1 | Adaptor - Rim Stud Retainers - Rim Stud Retainers for mounting adaptors. Compatible with all current production slip-on spade sleeves. Standard and compatible only with 175-321-1 and 175-325-1 adaptors. (1 kit required per axle) | $101.60 | $100.06 |
| 20-550-1 | Adaptor - Rubber Pad Sleeve Kit Includes 4 each of the following: Mag Assembly Adapter (175-37-3) Mag Assembly Adaptor (175-63-3) | $160.00 | $129.76 |
| 20-1446-1 | Adaptor - Safety Hook Assembly - (set of four) Compatible with 39-22-1, 39-25-1 and 39-44-1 Safety Cables. Includes 4 Safety Cable Hook Assy (216-58-1) | $85.00 | $83.71 |
| 20-1897-1 | Adaptor - Safety Hook Assembly - (set of four) Compatible only with 175-321-1 and 175-325-1 self-centering adaptors.Includes 4 Safety Cable Hook Assy. (39-50-1) | $48.00 | $47.27 |
| 175-285-1 | Adaptor - Self-Centering Wheel Adaptor - DSP250/300 Standard wheel adaptor. Clamping range - 13"- 20" (4 required) | $298.00 | $241.68 |
| 175-321-1 | Adaptor - Self-Centering Wheel Adaptor - For DSP500 Sensors. Adaptor is not compatible with horseshoe style storage brackets. Clamping range - 10"- 24.5" (4 required) | $298.00 | $241.68 |
| 175-325-1 | Adaptor - Self-Centering Wheel Adaptor - For DSP600 Sensors. Adaptor is not compatible with DSP400 or horseshoe style storage brackets. Requires 20-1770-1 Storage Brackets (Not Included) Clamping range - 10"- 24.5" (4 required) | $298.00 | $241.68 |
| 20-831-1 | Adaptor - Spade Sleeve Kit - (for 2 self-centering adaptors) (standard with self-centering adaptors) Includes 8 Rim Guard Tire Sleeves (106-70-2) | $34.30 | $27.82 |
| 20-551-1 | Adaptor - Spade Sleeve Kit - (for 2 self-centering adaptors) Includes 8 Rim Stud Sleeves (106-70-2) and 8 Storage Plug Assemblies | $44.80 | $36.33 |
| 20-1522-1 | Adaptor - Spade Sleeve Kit - (for 2 self-centering adaptors) for rim guard tires. Includes 8 Rim Guard Tire Sleeves (106-118-2) | $44.00 | $35.68 |
| 20-1789-1 | Adaptor - Tire Clamp Adaptor - (set of four) Compatible only with 175-321-1 and 175-325-1 self-centering adaptors. Grips tire tread. (21" - 40" Tire O.D.) | $1,350.00 | $1,094.86 |
| 20-1558-1 | Adaptor - Tire Clamp Adaptor - (set of four) Use with self-centering adaptors 175-200-1, 175-285-1, 175-304-1, and 175-305-1. Grips tire tread. (21" - 40" Tire O.D.) | $1,330.00 | $1,078.64 |
| 20-1841-1 | Adaptor - Upgrade Kit For DSP400 and DSP600 Sensors - For mounting to aligner cabinet or a wall. Includes (4) 175-325-1 Self-Centering Wheel Adaptors (clamping range - 10"- 24.5"), (4) Storage Brackets, and Instrument Support Adaptor Plate Kit 20-1822-1. | $1,520.00 | $1,232.73 |
| 20-1842-1 | Adaptor - Upgrade Kit For DSP400 and DSP600 Sensors - For mounting to sensor columns. Includes (4) 175-325-1 Self-Centering Wheel Adaptors (clamping range - 10"- 24.5"), (4) Storage Brackets, and mounting hardware. | $1,392.00 | $1,128.92 |
| 20-1559-1 | Adaptor - Upgrade Kit For Tire Clamp Adaptor Kit 20-1108-1 -(set of four) Replaces the current tire hooks on Kit 20-1108-1, increasing maximum tire range from 27 to 40 inches. Use with self-centering adaptors 175-200-1, 175-285-1, 175-304-1, and 175-305. | $553.00 | $448.49 |
| 20-1097-1 | Adaptor - Wheel Adaptor Extension - (set of four, covers 4 wheel adaptors) Increases maximum wheel diameter on self-centering adaptors by 2 1/2 inches. Compatible only with self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1. | $180.00 | $145.98 |
| 20-1792-1 | Adaptor - Wheel Adaptor Extension - (set of sixteen, covers 4 wheel adaptors) Increases maximum wheel diameter on self-centering adaptors by 3 1/2 inches. Compatible only with self-centering adaptors, 175-377-1, 175-321-1 and 175-325-1. | $466.00 | $377.93 |
| 20-1978-1 | Adaptor - Wheel Off Adaptor - (set of two) Allows faster and accurate alignment adjustments by removing the wheel and attaching the sensor directly to the lugs. Includes 2 Wheel Off Adaptors 175-376-1. (Requires WinAlign# 9.0) | $224.00 | $181.67 |
| 20-1979-1 | Adaptor - Wheel Off Adaptor Magnet Assembly - (set of two) Attaches to Wheel Off Adaptors allowing connection directly to the rotor. Includes 2 Wheel Off Adaptor Magnet Assemblies 60-31-1. (Requires Wheel Off Adaptor Kit 20-1978-1 and WinAlign 9.0) | $250.00 | $202.75 |
| 20-1688-1 | Additional rim stud retainers for 16" - 20" wheel adaptors. (set of eight) For mounting 2 adaptors. | $21.00 | $17.03 |
| 125-100-1 | Alignment Simulator - Hardware simulator with stand ( price shown is net - net). Cables not included. Order 38-465-1 cable if needed. | $905.00 | $1,048.52 |
| 20-2198-3 | Alignment Tool Kit - This kit contains many of the more commonly used correction tools. | $1,180.00 | $956.99 |
| 20-2313-1 | Alternative Mounting Base for Pronto and PA121 | $450.00 | $364.95 |
| 20-1488-1 | Auxiliary DSP Sensor Charging Station - Provides a second charging station where cordless sensors and DSP400, DSP600, HS401 or HS400 Sensors are being used with the same console. | $300.00 | $243.30 |
| 20-2333-1 | BMW 20 PIN Cable - For use with CodeLink. Required for model year 2001 and older BMW models with Dynamic Stability Control (DSC). | $130.00 | $105.43 |
| 20-2389-1 | Bar Code Reader Storage Tray - Provides a storage tray for a bar code reader cradle, and an alternative mounting for the bar code reader itself. | $75.00 | $60.83 |
| WA15-S | Brake Pedal Depressor | $14.90 | $14.68 |
| 20-2011-1 | Bump Steer Winch Kit - Allows the technician to detect bump steer while safely pulling down the vehicle at varying increments to record height change measurements. (Includes bridge, winch and laser scale) | $580.00 | $470.39 |
| 20-2384-1 | Clamp Kit for HS401CM Sensors - Allows the user to quickly tighten or loosen the camera boom. Helps in conditions where wind may be moving the camera boom. CM sensor shipments after July 6th, 2009 already include this hardware. | $38.00 | $37.42 |
| 20-2150-1 | CodeLink with XF2 POD - Data link from WinAlign to vehicle OBDII (J1962) connector. Order if wireless capability needed and no existing XF2 POD. Includes CodeLink device, XF2 wireless POD, J1962 cable. Requires WinAlign 11.0 or greater. | $1,290.00 | $1,046.20 |
| 20-2151-1 | CodeLink without XF2 POD - Data link from WinAlign to vehicle OBDII (J1962) connector. Order if you already have XF2 POD or do not want wireless capability. Includes CodeLink device and J1962 cable. Requires WinAlign 11.0 or greater. | $975.00 | $790.73 |
| 213-47-2 | Convex Mirror (wall mount) | $160.00 | $129.76 |
| 20-2115-1 | Cordless Remote Indicator XFRetro Kit - Replaces XF communication in the Plus Cordless Remote Indicator, 30-418-1-1 and Icon Cordless Remote Indicator, 30-421-1 so that they can communicate with XF Pods built prior to 6-27-06. | $326.00 | $264.39 |
| 194-18-2 | Cordless Sensor Battery - (each) For 200 and 300 Series Sensors | $18.00 | $17.73 |
| 194-23-2 | Cordless Sensor Battery - For 500 Series Sensors and Plus Cordless Remote Indicator, 30-418-1 and Icon Cordless Remote Indicator, 30-421-1 (each) | $28.00 | $27.57 |
| 20-2050-1 | DSP600 Live Ride Height Targets - For use with all HS401 and DSP600 sensors. Includes four Live Ride Height Targets and 20 adhesive strips. (Requires WinAlign# 9.0) | $350.00 | $283.85 |
| 20-2199-1 | Drawer Organizer Kit - Provides dividers and tool and part organizers for the drawers on WA240, R811P and R611P consoles. (Does not include Alignment Tool Kit, 20-1561-3 or Shim/Bushing/CAM Assortment, 20-2198-3.) | $280.00 | $227.08 |
| 69-787-2 | Equipment Cover for 211/411/611/611P "M" Mobile cabinet models | $273.00 | $221.41 |
| 69-788-2 | Equipment Cover for P111/211/411/611 W workbench cabinets. | $175.00 | $141.93 |
| 69-1025-2 | Equipment Cover for P411M27, R611/811 M mobile cabinets with DSP200/250/300/500 passenger car and truck sensors and DSP400/600 sensor targets. This cover will also fit S811s with DSP306T/506T and DSP400/600 sensors. | $273.00 | $221.41 |
| 69-1187-2 | Equipment Cover for R811 and S811 M mobile cabinets without hangers and sensor or targets. | $273.00 | $221.41 |
| 20-1960-1 | HS401CM and DSP600CM Anchor Plate Kit - Floor mounted "Anchor Plate Kits" are used to properly position the cabinet and sensors in each bay. The HS401CM configuration is shipped with one set of Anchor Plates. | $160.00 | $129.76 |
| 20-1885-1 | Handheld Ride Height Remote - This kit contains only the Ride Height Handheld Wireless Remote Control. The Remote kit, 20-1885-1 is compatible with Series 811 consoles shipped after September 1st, 2004, units shipped prior to this require kit 20-1928-1.* | $665.00 | $539.32 |
| 20-1928-1 | Handheld Ride Height Remote Kit - Ride Height Handheld Wireless Remote Control Upgrade Kit. Includes Ride Height Handheld Wireless Remote Control Kit 20-1885-1 and USB Upgrade Kit 20-1923-1 to upgrade an existing 811 aligner. | $1,365.00 | $1,107.03 |
| 20-2375-1 | Hawkeye sensor adaptor mount - set of 4 brackets that may be mounted to HS40X columns, RX and 4- post lifts. Brackets hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors). Compatible only with 175-321-1 and 175-325-1. | $97.00 | $78.67 |
| 20-2290-1 | High Definition Target Kit - Includes (4) HD Targets. For use with all HS401 and DSP600 sensors. HD Targets require a WA or 811 console with USB 2.0 and WinAlign 10.0 or greater software. Refer to WinAlign 10.X Release Notes for additional requirements. | $2,260.00 | $2,225.64 |
| 30-421-1 | Icon Cordless Remote Indicator - New style cordless remote indicator for Series 811, 611 with USB support and PA100 Aligners. Requires XF2 Pod Kit, 20-2072-1. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06. | $1,550.00 | $1,257.06 |
| 30-419-1 | Icon Remote Indicator - New style remote indicator for Series 111, 211, 311, 411, 511, 611, 811 or PA100 Aligners. | $975.00 | $790.73 |
| 20-1762-1 | Instrument Support Adaptor Plate Kit - (set of four) Adaptor plates allow DSP500 hangers to be mounted to alignment cabinets that only have mounting holes for older, horse-shoe style sensor supports. (Does not include DSP500 Sensor hangers.) | $160.00 | $129.76 |
| 20-1822-1 | Instrument Support Adaptor Plate Kit - (set of four) Adaptor plates allow DSP600, HS401 and HS400 hangers to be mounted to walls or alignment cabinets. (Does not include sensor hangers.) | $194.00 | $157.34 |
| 20-2187-1 | Instrument Support Adaptor Plate Kit - (set of four) Adaptor plates allow HS401 and HS400 hangers to be mounted to walls or alignment cabinets. (Does not include HS401 and HS400 Sensor hangers.) | $207.00 | $167.88 |
| 20-1899-1 | Instrument Support Kit - (set of four) For use with Mercedes Benz and BMW Quick Clamp Adaptors and DSP500 Series Sensors. | $370.00 | $300.07 |
| 20-1900-1 | Instrument Support Kit - (set of four) For use with Mercedes Benz and BMW Quick Clamp Adaptors and DSP600 Series Sensors. | $345.00 | $279.80 |
| 20-1427-1 | Instrument Support Kit - (set of four) for two post and four post Hunter racks. Includes four brackets that mount to lift columns. Use with self-centering adaptors 175-200-1, 175-285-1, 175-304-1, and 175-305-1 (not suitable for cordless sensors). | $116.00 | $94.08 |
| 20-1770-1 | Instrument Support Kit - Includes four brackets that mount to DSP600 or DSP400 columns. The brackets will hold self-centering wheel adaptors and sensors/targets (not suitable for cordless sensors). Use with self-centering adaptor 175-321-1 and 175-325-1. | $200.00 | $162.20 |
| 20-2193-1 | Instrument Support Kit- (set of four) Includes four brackets that mount HS401 or HS400 columns. The brackets will hold self-centering wheel adaptors (175-321-1 and 175-325-1) and sensors/targets (not suitable for cordless sensors). | $117.00 | $115.22 |
| 20-2116-1 | Line Conditioner Shelf Kit - Provides a shelf for storing a line conditioner on a R or S cabinet. Line conditioner is not included or sold buy Hunter Engineering Company. | $105.00 | $85.16 |
| 20-2112-1 | Live Ride Height Adhesive Strips Kit - For use with HS401 and DSP600 Live Ride Height Targets (100 Adhesive Strips) | $10.00 | $9.85 |
| 232-126-2 | Mouse - Replacement mouse for Series 211/411 only (D style cable connector). | $33.00 | $26.76 |
| 20-1480-1 | Mouse Pad Kit - for consoles shipped before 9/98. Mounts over keyboard. | $60.00 | $48.66 |
| 20-1695-1 | Organizer Storage Bracket (mounts on the rear of an PA100 and S511 cabinet, holding accessories Steering Wheel Holder, Brake Pedal Depressor, etc.) (Standard on R, S811P and S811 cabinets) | $55.00 | $54.16 |
| 30-418-1 | Plus Cordless Remote Indicator (LED) - For Series 811 Aligners. Records tire pressure, tread depth, ride height and measures tire temperature and frame angle. Includes Tire Temperature Probe. Requires XF2 Pod Kit, 20-2072-1 and WinAlign# 9.0. * | $1,850.00 | $1,500.37 |
| 136-95-2 | Power Line Filter - Line conditioner used to suppress high frequency noise in the AC line (Standard with WA200 Series Aligners). | $105.00 | $103.40 |
| 51-754-1 | Rear Slip Plates - 1 3/8 inch thick (Two required) | $169.00 | $137.06 |
| 20-1192-1 | Rear Spacer Kit - for use with electronic turnplates - 20-1192-1 is for D Racks, L202, RL and RM. | $510.00 | $413.61 |
| 20-1193-1 | Rear Spacer Kit - for use with electronic turnplates - 20-1193-1 is for the L401, L404 and RLHD. | $510.00 | $413.61 |
| 20-1678-1 | Rear Spacer Kit - for use with electronic turnplates - 20-1678-1 is for the RX-9. | $510.00 | $413.61 |
| 20-1679-1 | Rear Spacer Kit - for use with electronic turnplates - 20-1679-1 is for the RX-9-L, RX-12-L, or RX-12-XL. | $510.00 | $413.61 |
| 20-1683-1 | Rear Spacer Kit - for use with electronic turnplates - 20-1683-1 is for the L421, L424 and 4P DC. | $510.00 | $413.61 |
| 20-2055-1 | Remote Hanger Kit - Allows mounting of the Icon Remote Indicator in different locations. Ships standard with Icon Remote Indicator, 30-419-1. | $80.00 | $64.88 |
| 20-2056-1 | Remote Hanger Recharge Kit - Allows mounting and recharging of the Plus and Icon Cordless Remote Indicator Wireless in different locations. Ships standard with Plus Cordless Remote Indicator, 30-418-1 and Icon Cordless Remote Indicator, 30-421-1. | $265.00 | $214.92 |
| 20-1922-1 | Roll Around Sensor Cart - Used to store four self-centering wheel adaptors (including attached DSP500 sensors or DSP600 targets) and aextensions, pins, steering wheel holder, and brake pedal depressor. Does not provide battery charging for wireless sensor | $780.00 | $632.59 |
| 20-1575-3 | Shim/Bushing/CAM Assortment - This kit contains many of the more commonly used shim, bushing, and CAM correction kits. | $767.75 | $622.66 |
| 28-75-1 | Steering Wheel Holder | $42.00 | $41.36 |
| 20-1377-1 | Support Bracket for HFSS-Pod Order for use with existing older installations with 14" or 17" monitors and cordless sensors (for S and P cabinets). (Shown with optional equipment) | $40.00 | $32.44 |
| 25-129-1 | Turnplate - 14" Passenger Car/Lt. One Stainless Steel turnplate 1.5 inches thick (Two required) | $470.00 | $381.17 |
| 20-1918-1 | Turnplate - 14" Passenger Car/Lt. Two low friction Stainless Steel turnplates. 1.5 inches thick (two included) | $1,150.00 | $932.66 |
| 25-140-1 | Turnplate - One Passenger Car/Lt. Truck Turnplate 14" (Two required). | $278.00 | $225.46 |
| 25-18-1 | Turnplate - Passenger Car/Lt. Truck - 14" - with pointer (Two required). | $278.00 | $225.46 |
| 20-1963-1 | Turnplate Bridges - Replacement bridges for use with DSP400, DSP600, HS401 and HS400 Sensors. 50mm thick for use with RX DC and PowerSlide racks (2 included) | $105.00 | $85.16 |
| 20-2307-1 | Turnplate Bridges - Replacement bridges for use with HS401 and HS400 Sensors. 1.5 inches thick (2 included) | $105.00 | $85.16 |
| 20-1469-1 | Turnplate Y-Cable wiring kit - connects (2) 50mm turnplates to DSP300 non-HFSS sensors (requires kit 20-1386-1). | $145.00 | $142.80 |
| 20-1386-1 | Turnplate wiring kit - connects (2) 50mm turnplates to DSP300HFSS sensors. | $210.00 | $170.31 |
| 20-1487-1 | Turnplates - Pair of 50mm electronic turnplates with protective covers (turnplates only) (no connectors are included). | $2,110.00 | $1,711.23 |
| 20-1477-1 | Turnplates - Pair of 50mm electronic turnplates with protective covers for Passenger Cars/Lt. Trucks (Includes wiring for use with a Hunter rack wiring kit). | $2,013.00 | $1,632.56 |
| 20-2072-1 | XF2 Pod Kit - XF pod for Plus Cordless Remote Indicator, 30-418-1-1 and Icon Cordless Remote Indicator, 30-421-1. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06 and is not compatible with DSP500 Cordless Sensors built before 6-27-06. | $315.00 | $255.47 |
411 Console Options |
|||
| 20-1259-1 | CD-Video Option - for field update of 411 consoles shipped prior to 4/28/98. Just in Time and On-the-Job video instruction for inspection, adjustments, and operation. Requires 20-1196-1. Note that S411 require 20-1288-1. | $975.00 | $790.73 |
| 20-1392-1 | Combination CD-PHOTO/CD-VIDEO Kit - for consoles shipped after 4/28/98 - Just in Time, and On-The-Job video instruction for inspection, adjustments and operation. | $1,475.00 | $1,196.24 |
| 20-1323-1 | Memory Upgrade Kit - Increases memory on Series 411 Aligners from 16 to 32 MB RAM. (for units shipped after 11/1/97) | $50.00 | $40.55 |
| 20-1258-1 | Memory Upgrade Kit - Increases memory on Series 411 Aligners from 8 to 16 MB RAM (for units shipped before 11/1/97) | $25.00 | $20.28 |
| 20-1288-1 | Multimedia and HFSS Wiring Upgrade Kit - Accommodates CD-Video and HFSS option on S model PC based aligners. (required when ordering cordless sensors or multimedia options on S cabinets) | $500.00 | $405.50 |
611 Console Options |
|||
| 20-1534-1 | Digital-PHOTO/VIDEO Combination Kit for P and S cabinets. Provides both digital inspection and adjustment photos, and video instruction. Includes electronic key, DVD Multimedia and speaker. S model cabinets require kit 20-1288-1. | $1,475.00 | $1,196.24 |
| 20-2199-1 | Drawer Organizer Kit - Provides dividers and tool and part organizers for the drawers on WA240, R811P and R611P consoles. (Does not include Alignment Tool Kit, 20-1561-3 or Shim/Bushing/CAM Assortment, 20-2198-3.) | $280.00 | $227.08 |
| 20-1498-1 | Internet Communication Module - High-speed modem for Series 611 Aligners. (Standard on R611P-Plus models shipped after 10/15/00) | $90.00 | $72.99 |
| 20-1649-1 | Memory Upgrade Kit - Increases memory on Series 611 Aligners and 611-SI units shipped after 6/15/01 from 64 to 128 MB RAM. | $118.00 | $95.70 |
| 20-1288-1 | Multimedia and HFSS Wiring Upgrade Kit - Accommodates CD-Video and HFSS option on S model PC based aligners. (required when ordering cordless sensors or multimedia options on S cabinets) | $500.00 | $405.50 |
| 20-1451-1 | Network Module - Network board connects a 611 console to a network vial 10/100 Mbit hub (only). | $50.00 | $40.55 |
811 Console Options |
|||
| 20-1755-1 | 2ShopResults.NET - 1 year subscription | $150.00 | $121.65 |
| 20-1761-1 | Combination Digital - PHOTO/VIDEO on DVD - (For existing 811 consoles with WinAlign 7.2.1 or earlier) Provides both digital inspection and adjustment photos, and AlignGuide video instruction for inspection, adjustments, and operation. Key included. | $1,475.00 | $1,196.24 |
| 20-1971-1 | Combination Digital - PHOTO/VIDEO on DVD - (For installation on new or existing WA100 consoles with WinAlign) Provides both digital inspection and adjustment photos, and AlignGuide video instruction for inspection, adjustments, and operation | $1,475.00 | $1,196.24 |
| 20-1970-1 | Digital-PHOTO on DVD - (For installation on new or existing WA100 consoles with WinAlign) Provides digital inspection and adjustment photos. Includes "X2" electronic key. (Video clips require Combination kit 20-1971-1) (Standard on all WA200 | $500.00 | $405.50 |
| 20-2211-1 | Memory Upgrade Kit (1 GB) provides 1 GB to WinAlign WA100, WA200 and 811-B Aligners. Contains one 1 GB memory module. | $225.00 | $182.48 |
| 20-2223-1 | Memory Upgrade Kit (1 GB) provides 1 GB to beige 811 units. Contains two 512 MB memory module. If the beige 811 motherboard only has two memory slots, both of the existing memory modules will need to be removed to accommodate the new memory. | $203.00 | $164.63 |
| 20-2038-1 | Memory Upgrade Kit (256 MB) provides an additional 256MB to 811-B Standard and Plus units. | $155.00 | $125.71 |
| 20-2222-1 | Memory Upgrade Kit (512 MB) provides 512MB to beige 811 units. Contains one 512 MB memory module. If the beige 811 motherboard only has two memory slots, one of the existing memory modules will need to be removed to accommodate the new memory. | $140.00 | $113.54 |
| 20-1760-1 | Network Module - connects a Hunter WinAlign Series Aligner to a customer's network. | $160.00 | $129.76 |
| 20-1756-1 | ShopResults.NET - 3 year subscription | $300.00 | $243.30 |
| 20-1757-1 | UnderCarInfo.NET - 1 year subscription | $150.00 | $121.65 |
| 20-1758-1 | UnderCarInfo.NET - 3 year subscription | $300.00 | $243.30 |
| 20-2005-1 | WinAlign Plus Kit - (For installation on new or existing WA100 consoles with WinAlign) Provides PHOTO/VIDEO on DVD and WinAlign Tuner. Includes "X2" electronic key. (Standard on WA200s consoles) | $1,975.00 | $1,601.74 |
| 20-2004-1 | WinAlign Tuner Kit - (For installation on new or existing WA100 consoles with WinAlign) Provides custom alignments for modified vehicles. Includes "X2" electronic key. (Standard on WA200 consoles) | $500.00 | $405.50 |
| 20-2195-1 | Wireless Network Kit - connects a WA100 Aligner to a shop's existing 802.11 a/b/g wireless network. | $180.00 | $145.98 |
Pronto Systems |
|||
| PRONTO | Pronto - Aligner column/wall mount cabinet, with ProAlign alignment software, 17" LCD Flat Panel Display, color printer w HS200ML 2 camera sensors and standard hexagonal target | $15,830.00 | $12,838.28 |
| PRONTO-II | Pronto II - Aligner w/ mobile cabinet with ProAlign alignment software, 17" LCD Flat Panel Display, color printer, HS200ML 2 camera sensors and standard hexagonal targets | $17,295.00 | $14,026.41 |
 |
Sensors and Sensor Options |
||
DSP500 Series |
|||
| 20-1802-1 | DSP500 Ride Height Kit - Includes four DSP500 Ride Height Transducers and a Ride Height Tool. | $750.00 | $608.26 |
| DSP506 | DSP506 - 4 Optical Sensors with Self-Centering Wheel Adaptors. (Compatible with Series 811 and PA100 consoles) (Shown with optional equipment) | $7,435.00 | $6,029.85 |
| DSP506-RH | DSP506-RH - 4 Optical Sensors with Self-Centering Wheel Adaptors and ride height. (Compatible with Series 811) (Shown with optional equipment) | $8,185.00 | $6,638.11 |
| DSP506XF | DSP506XF - 4 Cordless Optical Sensors with Self-Centering Wheel Adaptors. (Compatible with Series 811and PA100 consoles) (Shown with optional equipment) | $9,700.00 | $7,866.79 |
| DSP506XF-RH | DSP506XF-RH - 4 Cordless Optical Sensors with Self-Centering Wheel Adaptors and ride height. (Compatible with Series 811 consoles) (Shown with optional equipment) | $10,450.00 | $8,475.05 |
| DSP508 | DSP508 - 4 Optical Sensors with rear toe arms and Self-Centering Wheel Adaptors. (Compatible with Series 811 and PA100 consoles) (Shown with optional equipment) | $9,205.00 | $7,465.34 |
| DSP508-RH | DSP508-RH - 4 Optical Sensors with rear toe arms, ride height, and Self-Centering Wheel Adaptors. (Compatible with Series 811) (Shown with optional equipment) | $9,955.00 | $8,073.60 |
| DSP508XF | DSP508XF - 4 Cordless Optical Sensors with rear toe arms and Self-Centering Wheel Adaptors. (Compatible with Series 811 and PA100 consoles) | $11,470.00 | $9,302.28 |
| DSP508XF-RH | DSP508XF-RH - 4 Cordless Optical Sensors with rear toe arms, ride height, and Self-Centering Wheel Adaptors. (Compatible with Series 811 consoles only) (Shown with optional equipment) | $12,220.00 | $9,910.53 |
HS400 Series |
|||
| HS400PD | PA - Double wide pit with overhead camera mounting configuration where two sets of HS400 sensors will be used. NO MOVING PARTS. Includes two sets of Cameras, Hexagonal Targets, Wheel Adaptors and turnplate bridges. | $29,060.00 | $23,567.93 |
| HS400FM | PA - Floor mounted overhead camera configuration for drive through. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, Hexagonal Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS400FC | PA - NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, Hexagonal Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS400PS | PA - Overhead camera mounting configuration suitable for use in a PN pit. NO MOVING PARTS. Includes 4 Cameras, Hexagonal Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS400DT | PA - Suitable for an alignment quick check lane where the quick checks are done at floor level, or for use in a pit. HS400DT may not be used with alignment racks. Includes 4 Cameras, Hexagonal Targets, Wheel Adaptors, and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS400LC | PA - Vertical camera lift with full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, Hexagonal Targets, Wheel Adaptors and turnplate bridges. | $16,030.00 | $13,000.48 |
| HS400WM | PA - Wall mounted for straight approach bays. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, Hexagonal Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| 20-2184-1 | Wall Mount Extension Kit - Adds up to 25 1/2" to HS401WM configurations. For details refer to HS401WM Site Requirements Form 5645T and HS401WM Site Requirements Form 5654T | $230.00 | $186.53 |
HS401 Series |
|||
| 20-2050-1 | 2DSP600 Live Ride Height Targets - For use with all HS401 and DSP600 sensors. Includes four Live Ride Height Targets and 20 adhesive strips. (Requires WinAlign# 9.0) | $350.00 | $283.85 |
| 20-2384-1 | Clamp Kit for HS401CM Sensors - Allows the user to quickly tighten or loosen the camera boom. Helps in conditions where wind may be moving the camera boom. CM sensor shipments after July 6th, 2009 already include this hardware. | $38.00 | $37.42 |
| 20-1960-1 | HS401CM and DSP600CM Anchor Plate Kit - Floor mounted "Anchor Plate Kits" are used to properly position the cabinet and sensors in each bay. The HS401CM configuration is shipped with one set of Anchor Plates. | $160.00 | $129.76 |
| 20-2321-1 | HS401CM to Stand Alone Mount Conversion Kit (Black) | $800.00 | $648.81 |
| 20-2320-1 | HS401CM to Stand Alone Mount Conversion Kit (Red) | $800.00 | $648.81 |
| 20-2112-1 | Live Ride Height Adhesive Strips Kit - For use with HS401 and DSP600 Live Ride Height Targets (100 Adhesive Strips) | $10.00 | $9.85 |
| HS401ML | Manually operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges. Wall mt cabinet not supported. | $14,530.00 | $11,783.96 |
| HS401CM | WA - Cabinet camera mounting configuration suitable for use with R811 consoles and may be rolled from bay to bay. NO MOVING PARTS. Includes 4 Cameras, High Definition Targets, Wheel Adaptors turnplate bridges, and one set of anchor plates. | $14,530.00 | $11,783.96 |
| HS401CMBLK | WA - Cabinet camera mounting configuration suitable for use with R811 consoles and may be rolled from bay to bay. NO MOVING PARTS. Includes 4 Cameras, High Definition Targets, Wheel Adaptors turnplate bridges, and one set of anchor plates. | $14,530.00 | $11,783.96 |
| HS401PD | WA - Double wide pit with overhead camera mounting configuration where two sets of HS401 sensors will be used. NO MOVING PARTS. Includes two sets of Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $29,060.00 | $23,567.93 |
| HS401FM | WA - Floor mounted overhead camera configuration for drive through. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS401DT | WA - For an alignment quick check lane where checks are done at floor level, or in a pit. May not be used with alignment racks since it only supports jacking the vehicle. Includes 4 Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS401FCN | WA - HS401FC Narrow Bays Sensors - Suitable for most installations. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS401LCN | WA - HS401LC Narrow Bays Sensors - With a vertical camera lift with full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and Turnplate Bridges. | $16,030.00 | $13,000.48 |
| HS401WMN | WA - HS401WM Narrow Bays Sensors - Wall mounted for straight or angled (herringbone) approach bays. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Def Targets, Wheel Adaptors. | $14,530.00 | $11,783.96 |
| 20-2254-1 | WA - HawkEye Narrow Bay Kit - May be used to modify an existing HS401WM, HS401FC, HS401LC or a HS401FM for use with narrow alignment bays. Includes a HawkEye camera support beam that is 10 inches (254 mm) shorter than the standard camera support beam. | $1,275.00 | $1,034.04 |
| HS401PS | WA - Overhead camera mounting configuration suitable for use in a PN pit. NO MOVING PARTS. Includes 4 Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS401FC | WA - Suitable for most installations. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS401LC | WA - Vertical camera lift with full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $16,030.00 | $13,000.48 |
| HS401WM | WA - Wall mounted for straight or angled (herringbone) approach bays. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors and turnplate bridges. | $14,530.00 | $11,783.96 |
| HS401FMN | WA- HS401FM Narrow Bays Sensors - Floor mounted overhead camera config for drive through. NO MOVING PARTS, yet still allows the tech to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Def Targets, Wheel Adaptors and tp bridges | $14,530.00 | $11,783.96 |
| 20-2184-1 | Wall Mount Extension Kit - Adds up to 25 1/2" to HS401WM configurations. For details refer to HS401WM Site Requirements Form 5645T and HS401WM Site Requirements Form 5654T | $230.00 | $186.53 |
HS401 Series Upgrades |
|||
| 20-2384-1 | Clamp Kit for HS401CM Sensors - Allows the user to quickly tighten or loosen the camera boom. Helps in conditions where wind may be moving the camera boom. CM sensor shipments after July 6th, 2009 already include this hardware. | $38.00 | $37.42 |
| 20-2316-1 | Pronto/Pronto-II/HS400 to HS401 camera upgrade kit. Contains cameras, hardware, HighDef targets. Requires a PA to WA upgrade kit. This kit is not adaptable to the HS400LC. THIS IS AN EXCHANGE PRICE KIT THAT WILL BE SOLD ONLY THROUGH THE HUNTER T/T REP. | $5,225.00 | $5,448.24 |