4 Post Lifts

TR-19
19,000 lbs.

TR-25
25,000 lbs.

TR-33
33,000 lbs.

TR35/TR-50
TR-75
35,000, 50,000 & 75,000 lbs.

TR110/TR-120
110,000-120,000 lbs.

FL-25
25,000 lbs.

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Specialty Items

Lift Options

TR-33, TR-35, TR-50 & TR-75

HEAVY DUTY FOUR POST RAMP LIFTS

Because Quality Lifts Last a Lifetime

mohawk above ground design

• The Mohawk four post design is the fastest lift made anywhere for fleets. Better than in-ground, mobile or parallelogram lifts, just drive on and go to work as no wheelbase adjustment is ever needed.

• Four post design provides more under vehicle access without side obstructions like scissors or parallelogram lifts.

• Surface mounted design and operation avoids the environmental issues associated with in-ground lifts.

• Clear floor design allows tool boxes, shop equipment and high rise tire dollies full access under and to the side of the vehicle for repairs. (see picture 12)
  

• 24” wide runways provide maximum undercarriage access with 4 feet between the runways.

features

• Full 6’-2 1/2” lifting height for the tallest mechanics.

• Adjustable runways to accommodate any vehicle wheelbase.

• Optional equipment such as rolling jacks, track lighting, air lines, oil drain pans and 110 volt outlets makes the best lift even better! (see options section)

versatile & adaptable

• Mohawk TR Lifts for fleets, utility vehicles, RV’s, school and transit bus operations, dump trucks and vans. Big and Small, Mohawk lifts them all!

superior safety systems

• Single point lock release.

• Multi-position mechanical safety locks in all posts. (see picture 3)

• Fully redundant hydraulic safety back-ups consisting of pressure compensated flow control and velocity fuse valving.

• Direct drive lifting cylinders at each post means no cables to stretch. (see picture 7)

• Mechanical side to side chain synchronization serves as redundant back-up to hydraulic fluid displacement
  equalization system.

• Automatic track leveler designed for heavy ended trucks to keep runways perfectly level.

• Front and rear wheel stops built into runway with automatic flip-up chocks at the rear end.

• Mohawk carriages smoothly ride on double sealed, self-lubricating ball bearing rollers. No plastic slide blocks! (see picture 11)

compare design features & construction

• Heavy duty track construction made with three parallel 12” wide flange I - beams. (see picture 2)

• Direct drive cylinders means no maintenance with no “top rail” to get in the way. (see picture 7)

• Available in 20’, 25’ and 30’ long runways (custom lengths available upon request.) (see picture 13)
  

• Mohawk offers a full 3 year warranty.
  

• The heaviest construction of any competitive lift. Just compare.

LIFT FEATURES

• 

  Full under-vehicle access with no obstructions (Note: tires raised off of runways.)

  1. Under-Vehicle Access
• 

  Optional shatterproof flourescent track lighting to brighten up the darkest vehicle undercarriages.

  2. Optional Track Lighting
• 

  Mohawk's all-position safety locks engage every 6" and continue to full lifting height.

  3. Safety Locks
• 

  TR control panel design features simple two handed operation for maximum safety with single point lock release.

  4. Simple Control Panel
• 

  10 HP unit designed for long life, smooth operation and minimal maintenance. Uses modular manifold valving for simplicity.

  5. 10HP Unit
• 

  Shallow angle approach ramps are 24" wide for easy drive on with the ability to accommodate a wide variety of vehicles (including low floor busses.) Shorter/longer or moveable ramps upon request.

  6. Approach Ramps
• 

  Built for the heavy duty lift user. Mohawk's 4 direct drive cylinders are engineered for a lifetime of heavy duty use.

  7. Direct Drive Cylinders
• 

  ALIGNMENT COMPATIBLE. To verify alignment at any working height.

  8. Alignment Compatible
• 

  ALIGNMENT COMPATIBLE. To verify alignment at any working height.

  9. Alignment Compatible
• 

  Mohawk Lifts can be installed as flush-mounted lifts, leaving runways level with shop floor.

  10. Flush Mount Capable
• 

  Mohawk columns are made of 6" x 1" thick fork lift mast sections, with carriages riding on 4" sealed ball bearing rollers and raise via direct drive lifting rods.

  11. Fork Lift Mast Columns

Floor area open, clear and accessible. 12. Floor area open, clear and accessible.

Mohawk runways can be set off center for wider equipment, or lifts can be manufactured with wider cross-rails, wider runways or heavier capacities. Custom Widths and Capacities

AVAILABLE LIFT OPTIONS

• 

  Mohawk's RJ-50: 50,000 lb. capacity rolling electric/hydraulic low profile jacks for "wheel free" tire and brake service. Jacks roll the full length of the runway, or use two jacks to raise the entire vehicle off of the runways. Mohawk's rolling jacks lock in place when loaded.

  Rolling Electric/Hydraulic Jack
• 

  Optional shatterproof fluorescent track lighting to brighten up the darkest vehicle undercarriages.

  Flourescent Track Lighting
• 

  Optional rolling 30 gallon oil drain pan makes oil changes quicker & easier. Expanded steel grate supports filters when draining.

  Rolling 30 Gallon Drain Pan
• 

  Tire Dolly Model TD-1000: 1,000 lb. capacity, use with any above or in-ground lift, high 46" lifting height and 6" side shifting ability makes alignment simple.

  TD-1000 Tire Dolly
• 

  Transmission Jack
  • 2,000 lb. capacity.
  • Fully adjustable universal saddle with adjustable arms to position the transmission.
  • Air/Hydraulic foot pump provides hands free operation and easy convenient lifting.

  Transmission Jack
• 

  Portable Oil Drain Pan
  • 25 gallon capacity.
  • Self-evacuating when pressurized.
  • Easily rolls on high quality casters.

  Portable Oil Drain Pan
• 

  Scissor Table
  • 2,500 lb. air/hydraulic scissor lifting table for removing rear ends, differentials or heavy transmissions.

  Scissor Lifting Table
• 

  Mohawk 6 Post 60’ Long Lift
  • rack lengths available from 20 to 60 feet.
  • Six-post design for longer runways assures maximum wheel base coverage.
  • Custom fabricated for wider, narrower, longer, shorter or heavier applications. (For heavier models, see the TR-110/120 brochure online.)

  Mohawk 6 Post 60’ Long Lift

CLICK HERE TO LEARN ABOUT RUNWAY LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF