4 Post Lifts

TR-19
19,000 lbs.

TR-25
25,000 lbs.

TR-33
33,000 lbs.

TR35/TR-50
TR-75
35,000, 50,000 & 75,000 lbs.

TR110/TR-120
110,000-120,000 lbs.

FL-25
25,000 lbs.

---

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Specialty Items

Lift Options

TR-110/120 FOUR POST RUNWAY LIFTS

110,000-120,000LB. LIFTING CAPACITY
BUILT SAFE, BUILT SOLID, BUILT FOR YOUR NEEDS.





Need your lift longer, taller, shorter,
wider, or heavier? Contact Mohawk Now.

FEATURES:

• Built to your fleets requirements
• Built to any width & any length
• 4 post design gives full under-vehicle access
• Available wheel free rolling jacks for tireand brake service

BENEFITS:

• Service your vehicles with full under-vehicle clearance

SAFETY:

• Pressure compensated flow control hydraulic safeties
• Velocity fuse hydraulic safeties
• All position mechanical locks in all columns
• Automatic equalization for heavy-ended vehicles
• 1” x 7” fork lift channel column construction
• Each carriage rolls on four 5” double sealed self lubricating ball bearing rollers
• Large 3’ x 3’ x 1” thick foot prints to distribute the weight
• Automatic descent alarm when locks are disengaged
• Designed with NEMA 4/12 electronics

Heavy Duty Mohawk Lifts make The Toughest Service Jobs Quick, Easy and Safe.

• 

  Lifting Columns built of 1” by 7” Fork Lift mast section with all carriages riding on 5” sealed rollers. Inverted heavy duty lifting cylinders in each column; uses no chains or cables to wear or which need replacing.

  Heavy Duty Lifting Cylinders
• 

  Heavy duty low angle approach ramps are 36” wide for easy lift entry and ability to accept a wide variety of vehicle wheel bases. Ramps are designed to fit your fleet & shop needs

  Low Angle Approach Ramps
• 

  Control box is positioned where you want it. Simple control system of up, down and park (lock) for assuring all locks are resting on the safeties.

  Simple Control System
• 

  Lift control system operates thru computer controlled PLC to keep all 4 cylinders and the entire lift operating synchronously.

  Computer Controlled PLC
• 

  Safety locks are 1 3/4” thick plate steel which lock into multi-position locking ribs. Each lock is controlled via position sensing reed switches for full lock engagement.

  Multi-Position Safety Locks
• 

  Optional electric/ hydraulic rolling jacks for wheel free service, or florescent lighting to illuminate vehicle undercarriage

  Optional Rolling Jack
• 

  Optional 1000 or 2000 lb. capacity tire dolly to remove the largest of wheel assemblies

  Optional Tire Dolly

CLICK HERE TO LEARN ABOUT RUNWAY LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF