2 Post Lifts

A-7
7,000 lbs.

System I
10,000 lbs.

LMF-12 &
TP-16
12,000 & 16,000 lbs.

TP-20
20,000 lbs.

TP-26/TP-30
26,000 & 30,000 lbs.

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Custom Lifts

Specialty Items

Lift Options

Models TP-26/TP-30

26,000 & 30,000 LB LIFTS

US PATENT #4500071 CANADIAN PATENT #436053

• 
  What Makes a Mohawk a
  Mohawk Brochure (PDF)
• 
  How a Mohawk 2 Post
  Lift is Made (PDF)

• 

  

MOHAWK DESIGN

• Lifts vehicles up to 30,000 lbs.
• Surface mounted design bolts to the shop floor.
• Twin post design allows complete under vehicle access for all repairs yet leaves the wheels hanging free for tire and brake service.
• Takes up less shop space than ramp lifts.
• ALI safety certified to meet national and local OSHA & ANSI codes (ANSI/ALI ALCTV-2006) for the safety of your shop’s employees.  
• No in-ground oil tanks, no digging for installations, making instal - lations fast and service easy.
• Medium thru Heavy Duty vehicles, Mohawk’s TP-26 or TP-30 lifts them all.
• Hammertone paint finish for lasting durability.

FEATURES

Mohawk lifts DO NOT use height restrictive overhead cable covers that limit lifting height.

• Constructed of heavy 7” x 1” fork lift mast channels (NOT formed sheet metal) for a lifetime of trouble free service.
• Each carriage rides on double sealed, self lubricating ball bearing rollers (NOT plastic slide blocks) for a lifetime of maintenance free service.
• Direct drive lifting rods attached to each cylinder and carriage meaning (no cables, chains, or pulleys); no parts to wear or maintain.
• WIDE 48” base for stability.

BENEFITS

• Arm length designed to accommodate all of your specific fleet wheel base requirements.
• 5”, 7 1/2” and 10” stacking truck adaptors included to reach truck frames and get around fuel tanks or tool boxes.
• Built to last forever.

SAFETIES

• Hand-held pendant control to raise or lower the lift by releasing both mechanical locks & allowing hydraulic fluid to return to the reservoir.
• Release the mechanical locks with Mohawk’s air cylinders. Upon release, safeties immediately re-engage.
• 26,000 or 30,000 lb. capacity to safely raise loaded work and utility trucks.
• 12 position 11/2” steel plate safety locks in each post start engaging at 5” and continue every 6” through the full lifting height of 6’7”.
• Patented Hydraulic locking system, backed by velocity fuses and Pressure Compensated Flow Control valving.

LIFT FEATURES

• 

  Mohawk’s TP-26, TP-30 gives FULL under vehicle access for all repairs, yet takes up minimal bay space, while leaving the wheels hanging free for tire, brake or any other necessary repairs.

  Under Vehicle Access
• 

  Mohawk’s all position mechanical and hydraulic safety systems lock the vehicles at ALL working heights. Mohawk safeties consist of 1 ¹⁄₂” plate steel locks engaging into the slotted carriage lock racks every 6”.

  Safety Systems
• 

  5 HP 3 phase power unit delivers fluid equally to twin hydraulic cylinders for quick and smooth lifting.

  Three Phase Power Unit
• 

  Mohawk’s large and stable footprint measures 48” wide x 30” (or 42”) deep and is made of 1” thick plate. Mohawk’s baseplate gives stability to the lift, while distributing the load to the shop floor. The TP-26/TP-30 requires 12” of concrete or optional footprint (shown) for shops with only 8” floors.

  Baseplate
• 

  Mohawk columns are constructed of 1” thick, HIGH STRENGTH fork lift mast channels, using 24 double sealed, self lubricating ball bearing rollers to smoothly raise the lift, using large 4 1/2” cylinders for a lifetime of trouble free service.

  High Strength Columns
• 

  Mohawk stackable truck adaptors are included for access around gas tanks and tool boxes to reach the vehicle frame.

  Stackable Truck Adaptors
• 

  7” wide by 1” thick High strength fork lift channel construction

  Channel Construction
• 

  Optional Saftety Weight Gauge

  Optional Weight Gauge

CLICK HERE TO LEARN ABOUT OUR WEIGHT GAUGE

CLICK HERE TO LEARN ABOUT 2 POST LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF