 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
MODEL TP-20 20,000-LB. LIFT
THE 2 post lift for all of the vehicles in your shop.
Solid, SAFE & CERTIFIED.
 |
|
US PATENT #4500071 CANADIAN PATENT #436053
The lift for ALL your fleet
 |
7”wide by 1” thick High strength fork lift channel construction |
|
|
|
|
||
| Mohawk large and stable footprint measures 48” wide x 30” deep and is made of 1” thick plate. Mohawk’s large base gives stability to the lift, while distributing the load to the shop floor. The TP-20 only requires 61/2” of concrete. |
Mohawk’s all position mechanical and hydraulic safety systems lock the vehicles at ALL working heights. Mohawk safeties consist of 11/2” plate steel locks engaging into the slotted carriage lock racks every 6” inches. |
3 HP single or 3 phase electric/ hydraulic power unit delivers fluid to large twin hydraulic cylinders. Optional 3 phase 5HP motor speeds the lifting cycle to 90 seconds. |
||
|
|
|
|
||
Mohawk’s TP-20 gives FULL under vehicle access for all repairs, takes up minimal bay space, while leaving the wheels hanging free for tire, brake or any other necessary repairs. |
|
Mohawk TP-20 columns are constructed of 1” thick, high strength fork lift mast channels, using 24 double sealed, self lubricating ball bearing rollers to smoothly raise the lift, using large 41/2” cylinders for a lifetime of trouble free service. |
|
Mohawk double telescoping 3 stage swing arms are only 5 3/8” high to fit under the passenger cars in your fleet. Triple telescoping arms allows lifting of vehicles from large utility trucks, down to short wheelbase sub-compact cars. |
Mohawk TP-20 design
- Lifts vehicles up to 20,000 lbs.
- Surface mounted design bolts to the shop floor.
- No in-ground oil tanks, no digging for installations, making installations fast and service easy.
- Low profile, 3 stage arms for access under compact cars through medium duty trucks.
- ALI safety certified to meet national and local OSHA & ANSI codes (ANSI/ALI ALCTV-2006) for the safety of your shop’s employees.
- Light thru medium duty vehicles, Mohawk’s TP-20 lifts them all.
Features
- Constructed of heavy 7” x 1” fork lift mast channels (NOT formed sheet metal)
- Each of the carriages ride on double sealed, self lubricating ball bearing rollers (NOT plastic slide blocks) for a lifetime of maintenance free service.
- Direct drive lifting rods attached to each cylinder and carriage (no cables, chains, or pulleys) means no parts to wear or maintain
- WIDE 48” base for stability.
Benefits
- 3 section swing arms make positioning easier than a 2 stage arm and increases lifting range, for all wheelbases.
- 5”, 7 1/2” and 10” stacking truck adaptors included to reach truck frames and get around fuel tanks or tool boxes.
- Built Mohawk TOUGH—the TP-20 is the virtually the same structural column and same carriage used in Mohawk’s TP-26 and TP-30!
- Built to last forever.
Safeties
- Single position mechanical lock release, located at the main post, unlocks both safeties.
- Release the mechanical locks with Mohawk’s air cylinders. Upon release, safeties immediately re-engage.
- 20,000 lb. capacity to safely raise fully loaded work and utility trucks.
- 12 position 11/2” steel plate safety locks in each post start engaging at 5” and continue every 6” through the full lifting height.
CLICK HERE TO LEARN ABOUT OUR WEIGHT GAUGE
CLICK HERE TO LEARN ABOUT ALL OF MOHAWKS LIFT OPTIONS
VIEW THIS INFORMATION AS A PDF
CLICK HERE FOR ROUGH SPECIFICATIONS
CLICK HERE FOR DETAILED SPECIFICATIONS TP-20
 |
||||||||||||
Copyright ©2002-2006 Mohawk Resources, Ltd. Since 1981 Mohawk has manufactured the highest quality, safest auto and truck lifts available.
In addition to our high-quality safety systems, design and construction, Mohawk offers the most inclusive warranty in the service lift industry.
Just compare our lifts. Our staff will assist you with any technical questions you have about our entire line of vehicle lifts.