MODEL:

TR-75

Capacity:

75,000 lbs.

Lifting Speed:

120 seconds

Motor Rating:

10 HP/220 VAC, 3-phase

Lifting Height (Stroke):

5'

Runway Height at Full Stroke:

6' 3-1/2"

Weight:

29,000 lbs.

Overall Length:

36'-3 7/8"

Overall Width:

14' 5"

Width Between Posts:

12'

Track Width:

24"

Lifting Mechanism:

(4) Direct drive cylinders using no cables, chains or mechanical lifting screws.

Synchronization (Side to Side):

Hydraulic fluid displacement backed by twin opposing leaf chains.

Synchronization (fore and Aft):

Manual or automatic controls gear-type flow dividers, integral differential relief valving, and a fluid track leveling system.

Mechanical Safety Systems:

Infinite position mechanical locking wedge in each post.

Hydraulic Safety Systems:

Integral hydrostatic line blow off flow control devices and velocity fuses.

Electrical Safety Systems:

Cross-Wired Electronics Systems

Push Button Electronics:

NEMA Type 4 Waterproof

Controls:

Solenoid Operated

Wheel Chocks:

Standard Equipment

Concrete Requirements:

4000 PSI concrete 8" thick or (4) 6' x 6' footings 12" deep.

Work Area Around/Under Lift:

Clear and unobstructed when lift is raised.

Warranty:

5 years; limited lifetime on cylinders.