Parallelogram Lifts

PL-36, 50, 75 & 100
36,000, 50,000, 75,000 & 100,000 lbs. Capacities

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Custom Lifts

Specialty Items

Lift Options

PARALLELOGRAM LIFTS

36,000, 50,000, 75,000 & 100,000 lbs. Capacities

Surface Mounted or Flush Mounted with Runway Lengths from 26’ to 48’ long

Certified lifts: 38-26-S, 40-35-S, 45-35-S, 50-26-S, 50-32-S, 50-35-S, 75-26-S, 75-30-S, 75-35-S,38-26-F, 40-35-F, 50-26-F, 50-32-F, 50-35-F, 75-26-F, 75-30-F, 75-35-F

FEATURES

• A variety of track lengths from 26’ to 48’.
• 36,000 through 100,000 lb. capacities.
• Surface mounted, recessed or flush mounted.
• Rolling air-hydraulic jacks available in 25,000 lb. or 50,000 lb. capacities for wheels free service.
• Full undervehicle access for all trucks, buses & heavy equipment.
• Full 63” lifting height on either surface or flush mounted model.
• Full and clear, unobstructed under-the-vehicle access without structural cross brace, or torsion bar.
• 12 position mechanical safety locks in all legs starting at 24”.
• All lifts are plumbed for air lines in the runways, prewired for florescent runway lighting, no separate 110V power supply required for added options.

DESIGN BENEFITS

• The heaviest built parallelogram in the world for your heavy duty lifting requirements.
• Large 7 3/4" cylinders equal more power, lower PSI and longer component life.
• Self lubricating composite bearings with chrome plate pivot pins for maintenance free operation.
• Sturdy base design minimizes stress on the shop floor, allowing installation virtually anywhere.
• No structural cross brace (torsion bar) between the platforms; eliminates a trip hazard and the antiquated technology of a mechanical brace between the platforms.
• Hydraulic safeties throughout consisting of pressure compensated flow control valves and velocity fuses.
• Designed to eliminate binding and service issues of other parallelogram lifts.

CONTROL SYSTEM

• Computer controlled platform synchronization is programmable for different lifting heights; to accommodate various vehicles, low ceilings or different height technicians.
• Computer controlled dual high resolution, chain driven encoders monitor synchronous lifting and lowering 60 times per second.
• The computer’s alpha-numeric LCD display performs self test on startup, with information in plain english, with no flashing lights to be decoded.
• Control system user settings are input directly from the keypad or special settings are password protected. No outside computer is needed for reprogramming various settings.
• All platform switches and electrical sensors are located in the runway (not the shop floor). Continuous electrical runs from the lift's console eliminating splice connections in the shop floor (found on other lifts).
• 24 volt control circuit provides operator safety during control console operation.
• Manual pump and valving allow lowering in a no power situation.

detailed FEATURES

• 

  Mohawk's clear work area has no obstructive tie bar between the runways for total access.

  Clear Work Area
• 

  Simple 3 button operation; Raise, Lower & Park (lock). 24 volt controls for operator safety, lockout standard, with easily programmable computer controls.

  Control Panel
• 

  U.S. made G.E. internal computer & U.S. control components, simple wiring, 24 volt DC power, step-down transformer, fuses and starter box make the Mohawk parallelogram easy to operate, with nothing to maintain & readily accessible guaranteed parts availability.

  Starter Box
• 

  Mohawk base design assures stability is spread throughout the lift, and gives more strength than lifts which place all the load in one concentrated floor spot. Mohawk lifts require a minimal 6" thick concrete.

  Base Design
• 

  Mohawk safety latch racks are made of laser cut high strength T-1 steel, and assure safe smooth locking at all working heights.

  Safety Locks
• 

  For ultimate shop space savings, the flush mounted parallelogram is installed recessed in a pit, making the lift "invisible" when not in use to maintain maximum shop work flow.

  Flush Mount
• 

  For ultimate shop space savings, the flush mounted parallelogram is installed recessed in a pit, making the lift "invisible" when not in use to maintain maximum shop work flow.

  Space Savings

LIFT OPTIONS

• 

  Optional rolling air-hydraulic jacks operate individually and make "wheels free" service simple. Optional florescent runway lighting illuminates the vehicle undercarriage.

  • Twin power units with 3 position directional control valves.
  • Non-adjustable relief valves.
  • Power-up & power-down.
  • Cylinders have counterbalanced valves for safety to eliminate creep-down.
  • Spring loaded, cam follower suspension system for easy movement.

  Rolling Jack
• 

  Counterbalanced manual or air- hydraulic tire dolly makes removing heavy truck tires a simple & safe one man job.

  Tire Dolly
• 

  Mohawk's clear work area has no obstructive tie bar between the runways for total access.

  Track Lighting

CLICK HERE TO LEARN ABOUT ALL OF MOHAWKS LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF