2 Post Lifts

A-7
7,000 lbs.

System I
10,000 lbs.

LMF-12 &
TP-16
12,000 & 16,000 lbs.

TP-20
20,000 lbs.

TP-26/TP-30
26,000 & 30,000 lbs.

---

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Custom Lifts

Specialty Items

LMF-12 & TP-16
12,000 & 16,000 LB. CAPACITY LIFTS

HEAVY DUTY LIFTS FOR HEAVY DUTY SERVICE

 

Mohawk Lifts Video: A Lift To Higher Standards

 

 

 

MOHAWK'S DESIGN

• Mohawk columns are constructed of 3/4” thick forklift masts, for a lifetime of trouble-free service
• Each Mohawk carriage rolls on 8 double-sealed, self-lubricating, steel ball bearing rollers (NOT plastic sliders)
• Two 4” heavy duty cylinders make for safer, steadier lifting than single cylinder lifts or models with tiny cylinders
• Easily adjustable overhead stainless steel hydraulic lines can be set at any height (or routed in floor) to accommodate all tall trucks and vans.
• Low profile 5” swing arms fit under most passenger cars. Equipped with Mohawk’s 5", 7 1/2" and 10" stackable lift adaptor pads.

MOHAWK PATENTED INDUSTRY LEADING SAFETY SYSTEMS

• Mohawk lifts feature all position mechanical safety locks in both columns, starting at the ground, to full lifting height.
• Patented infinite position, internal hydraulic safeties backed by external pressure compensated flow controls and velocity fuse valving.
• Swing arm restraints automatically engage upon lifting and automatically disengage when the vehicle has been fully lowered.
• The best, and most inclusive warranty in the lift business, 5 years for the lift, plus the industry's only lifetime cylinder warranty. Mohawk builds the best lifts, with the best warranty.
• Lease/purchase plans available for 1-5 years. Call Mohawk now!

OPERATION

• Hydraulic fluid is pumped between the two cylinders through the overhead (or optional in-floor) stainless steel hydraulic lines. Patented hydraulic synchronization eliminates the need for restrictive height overhead covers, cables, pulleys, equalizer chains or obstructive floor plates.
• To raise the carriages, Mohawk’s LMF-12/TP-16 use direct drive lifting rods which eliminate the wear & maintenance associated with lifts that use cables, chains, & overhead cable covers.
• Mohawk carriages roll on eight double sealed, self-lubricating, steel ball bearing rollers, for a lifetime of maintenance-free operation. Mohawk bearings are longer lasting, with less friction and wear than competitive lifts using plastic slide blocks that need constant greasing and maintenance.

Two post lifts offer FULL unobstructed under vehicle access for all repairs, takes up minimal bay space and leaves the wheels hanging free for tire, brake or any other necessary repairs.		Mohawk large and stable footprint measures 30” wide by 24” and is made of 3/4” thick plate. Mohawk’s large base gives stability to the lift, while distributing the load to the shop floor.		Mohawk fork lift channel & bearing ( top right) VS. 3 different sheet metal columns which use plastic slides. Like your fork lifts mast, Mohawk lifts DO NOT WEAR OUT!
Heavy duty column construction with dual cylinders, & direct drive lifting rods (not cables) and stainless steel hydraulic lines (not rubber hoses) both of which will never wear.		Each carriage rolls on 8 4” double sealed, self lubricating, heavy duty ball bearing rollers for a lifetime of trouble-free service (not plastic slide blocks).		ALL position 1” thick mechanical locks on BOTH carriages engage the full length of travel
Large 4” cylinders equal longer seal life and lower operating pressures vs. smaller competitive cylinders.		5”, 7 1/2” and 10” stacking adaptors included (for hard to reach frames)		Fork lift channel & bearing (bottom) vs. competitive columns & plastic slider (top)
Mohawk lifts DO NOT use height restrictive overhead cable covers that limit lifting height.		Optional Speedlane Adaptor Slips on quickly for instant lifting without positioning swing arms yet leaves the wheels hanging free.		Optional Safety Weight Gauge to determine vehicle weight & aid vehicle diagnosis. Winner of Top 20 Tools.

CLICK HERE FOR TIME SAVING SPEEDLANE OPTION

CLICK HERE TO LEARN ABOUT OUR WEIGHT GAUGE

CLICK HERE TO LEARN ABOUT ALL OF MOHAWKS LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF

CLICK HERE FOR ROUGH SPECIFICATIONS

CLICK HERE FOR DETAILED SPECIFICATIONS LMF-12

CLICK HERE FOR DETAILED SPECIFICATIONS TP-16

CLICK HERE TO DOWNLOAD AUTOCAD LAYOUT FOR LMF-12

CLICK HERE TO DOWNLOAD AUTOCAD LAYOUT FOR TP-16

CLICK HERE FOR DETAILED COMPETITIVE FEATURES