Inground Lifts

Autop
8,500, 9,000 & 12,000 lb. Capacities

Multiflex 230-450
55,000, 66,000, 82500 & 99,000 lb. Capacities

---

2 Post Lifts

4 Post Runway Lifts

Mobile Column Lifts

Scissor Lifts

Parallelogram Lifts

In-Ground Lifts

Custom Lifts

Specialty Items

Lift Options

MOHAWK IN-GROUND LIFTS FROM AUTOP

LIGHT DUTY – 8,500, 9,000 & 12,000 lb. Capacities

Request Information

In 1949 Autop invented a new & now proven design for in-ground lifts. These design features are different than current technology for the in-ground cassette lift market. These long lasting lift designs have proved to be the ONLY way to manufacture, design and install cassette lifts when the goal is a lift that lasts!

Autop lifts start with a watertight container which are encased in a concrete “vault” to stop moisture & condensation within the lift’s cassette. Autop lifts have no need for water detection systems & internal water pumps found on other cassette lifts, BECAUSE NO MOISTURE GETS INTO THE LIFT.

Twin inverted cylinders are made of high grade steel, and then chromed to smoothly ride in Teflon® slide rings. Simply stated, Autop cylinders do not rust! Autops unique & flexible cross arm equalization system assures the cylinders are guided perfectly straight into high grade steel, and then chrome plated to smoothly ride in Teflon slide rings. This industry exclusive equalizer prevents problems from imbalanced vehicle loads (front to rear or side to side). The cross arm equalization incorporates both an air operated safety device and torsional locks for double protection.

Autop lift swing arms all incorporate automatic arm restraints. These swing arms are the LOWEST in the lift business for low profile cars & easy loading. All swing arm lifts are adjustable with a variety of height adaptors in addition to the low profile adjustable pads.

• All Autop lifts feature a time saving patented air supply built into both superstructures.
• For tall technicians, the Autop lift by Mohawk is the highest rising lift in the cassette lift market.
• A wall mounted power unit keeps all controls in easy reach.

Compare the differences & learn what 50 years of cassette lift experience can do for your shop.

 

LIFT FEATURES

• 

  Hardened chrome pistons equipped with a special alloy guide bearing that will not rust or rot out.

  Chrome Pistons
• 

  Water tight sealed aluminum access cover seals out moisture corrosives and dirt from inside the cassette.

  Sealed Access Cover
• 

  Flexible synchronization arm prevents binding from imbalanced loads and assures long guide bearing life.

  Flexible synchronization arm
• 

  Industry exclusive Arm restraints which automatically engage upon lifting.

  Arm Restraints
• 

  Stainless steel bolts secure the water tight aluminum access cover. Bolts will not rust or break off during inspection.

  Stainless Steel Bolts
• 

  Cylinders push-off of concrete footing as lift is not suspended from the floor, like other cassette lifts which hang in a pit.

  Cylinders
• 

  Mechanical safety locks automatically start engaging at only 3" of lifting height.

  Mechanical Safety Locks
• 

  Compressed air on all super structures.

  Compressed Air

LIFT MODELS

• 

  Model IGSA-9

  • 9,000lb. capacity
  • Compressed air on both cylinders
  • Lowest swing arms at only 3 7/8”
  • Automatic Arm Restraints
  • Adjustable height rubber cleated lift pads
  • Highest lifting height 85”

  Model IGSA-9
• 

  Model IGSA-12

  • 12,000lb. capacity
  • Compressed air on both cylinders
  • Three stage swing arms
  • Industry exclusive adjustable width superstructure to accommodate smallest to largest vehicles.
  • Highest lifting height 85”

  Model IGSA-12
• 

  Model IGDO-12

  • 12,000lb. capacity
  • Compressed air on both cylinders
  • 165” wheelbase capability
  • Lowest approach angle for low cars

  Model IGDO-12
• 

  Model IGWF-85

  • 8,500 lb. capacity
  • Wheels free pad lift
  • Instant on – instant up

  Model IGWF-85

 

CLICK HERE TO LEARN ABOUT ALL OF MOHAWKS LIFT OPTIONS

VIEW THIS INFORMATION AS A PDF